Jump to content
SAU Community

Recommended Posts

I am up for a registered and reliable car that will be fun on the track. I like Skylines (because I can fit in one) and at $18k it is much less of a write off worry.

What needs to be done? Suspension and tyres are a start. Are the brakes ok? What about the stock intercooler. How much weight could you get out of one? Power levels would be kept lowish for reliablity.

Anyone with experience of their own car?

Link to comment
https://www.sau.com.au/forums/topic/3093-r33-gts-t-as-a-track-hack/
Share on other sites

Originally posted by peteSmith

go an r32 gts4 and drop an rb25 det in it.. you will have a greater advantage due to less weight in the r32 (the 4wd might even it out) and way better handling with the ATESSA.

Just let you know it dont work... :D

but if you put RB26DETT then It'll fly! :P

cheers

Joe

Go the R32 GST-t Type M.

It's got R33 GTS-t brakes, without the extra weight.

4WD is good, but can be troublesome. If it is a track hack, then RWD is the way to go as any 4WD will understeer. Also cheaper to fix if something goes bang inside (which is very likely).

Any car with suspension and brake modification will have a very distinctive advantage over cars that have engine mods only on the track. Arrive at corners sooner but having to brake earlier and losing time through corners because you cannot balance the car and keep it on the racing line, vital time will be lost.

Tyres, as usual are also vital. Get a set of slicks and you'll be very happy.

Engine swaps and things go against the whole reliablity aspect I am after.... With the R32 or S13 the oldness factor goes against it for me. Am I wrong in thinking that?

Also what is the difference with the 4WD blocks. I presume the front left driveshaft goes through the sump or something.

I was thinking R31 coupe with RB25DET myself. Dedicated track car makes it much easier - no rego, no interior etc etc The guys at Powerplay can get hold of em cheap.

No so handy for cruises tho.

I would have it as a dedicated track car, but still with rego and stuff, for convenience. I don't have a tow car or a big workshop. Also it is much cooler to turn up and whip people's arse in the car you came in...

Personally i like the idea of a dedicated track track car as distinct from your daily or road car, it works out a hell of alot cheaper. Apparently somewhere sells things like R32 GTSt for $6K (was in TP), imported as race cars unable to see the road. Something like that would be great to throw minimal amounts of cash at and the financial risk of destroying the thing is minimized....

If you have a rego'd R33 its still going to cost you $18K give or take if you have a big moment at the track??

Guest Impul 25T

If you are looking for cheaper, get an R32GTSt typeM (with the bigger brakes) and put an RB25DET in it. Will still cost you less than a 33, plus have a lighter car.

As for removing weight in the 33, depends on how crazy you want to go. There is atleast 50kg's of tar sound deadening on the flooring, plus other stupid things like aircon, back seats, etc. Also, in between the rear seat and battery compartment, there is a really heavy metal divider plate. Replace that with some Aluminium or something and you'd save heaps of weight there also. Plus the 100,00km's of unnecessary wiring too......

$18k of GTS-t is much better than $55k of GT-R, it's all relative I guess. I go to plenty of sprints and see dented $220k 911 GT3's.

At least a GT3 will take the punishment and keep coming back for more. I have discovered GT-R's aren't quite as tough on the track as they appear on the road. Even with only minor mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Yeah, I don't believe the M35 uses a deadhead system.
    • Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...