Jump to content
SAU Community

Recommended Posts

Not the informeter, there is no input for it. I do all my logging with the Emanage Ultimate, wideband included, then I send the log to my tuner who rings me back and tells me if I need a re-tune after each mod. lol.

According to this link you spice the wideband in the pink wire on the infometer.

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Very nice find, I haven't seen that before. Might be a better gauge than the innovative one I use...

Well I've got one on order and it would be a bonus if this works (no reason to believe it doesn't). Pink must be an analogue input but I am not sure it's left free if you run the sensor adaptor also. Though having looked thsi picture of the wiring set-up it looks like the pink is still available even with the three external sensors = possible win.

16401702_1.jpg

Yeh, I have the external sensors all plugged in, which means I cant run the serial connection to the Emanage. I cant remember offhand if the pink wire was free.

I wonder if there are any other sensors I can plug in...

i wish i could get it to dim at night time. or when my headlights are on.

anyone know that one?

Mine doesn't dim either, so I just reduced the backlight to around 30%. Still fine in the day, and much better at night.

Hey quick question to all. How hot water temp is to hot. Hit 99 today in traffic and got little worried as I set alarm at 97. Air intake was at 76 :S

Mine does this also, in fact; those are the exact same peak numbers as on my Informeter. It's not nice to look at, but before you had the Informeter it was exactly the same; you just didn't know it.:whistling:

You have to understand this isn't an HQ holden, these engines are designed to run in the mid 80's minimum.

Modern engines run tight tolerances and the running temperatures reflect that, higher engine running temperatures also promote better emissions (notwithstanding the rich/retard things cars do when the weather gets really hot).

My last Honda road bike (CBR 929RR) had a digital temp gauge; running temp was 89 deg, would routinely run out to 106 deg, fan would come on drop it to 98 deg. I once rode it on a 47 deg day with a pillion, with the temp gauge sitting on 102 deg for 5 hours. I did 75000km on this bike and when I sold it it went EXACTLY the same as the day I bought it. Most Honda road cars, the optimum running temp is 90 -95 deg, it's just a number.

The cooling system is under pressure (10- 15psi is normal), water does not boil at 100 deg if it is pressurised. (I think the rule of thumb is an extra degree for every psi of pressure)

As Cephas says; the thing to worry about, is if the car doesn't cool down once you're moving (more than 70km/h). This means the cooling system, or the volume of water in the system is inadequate for the purpose.

Of course, any amount of heat you can remove from the syatem is a good thing (i.e external oil or trans cooler ducted AWAY from the radiator) just gives more headroom for the system to operate in extreme conditions.

Edited by Daleo

mines hit 107 before in hot weather with the AC on. this was stop start traffic

lately its been around 90-99 in stop start. once im moving at 60km it drops back to mid 80s. im not so worried anymore now other people are having similar numbers. i also have a nismo thermostat which i think was a stock one in a nismo box

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Got to 101 in traffic....intake temp got up to 79!!!!

Talk to zei20l.....pretty sure he has a spare standard airbox!

Ok I thought it was just me with high intake temps. As when I opened the bonnet it dropped 5 degrees within seconds. Also driving with bonnet open shows marked improvement with my crappy pod. But cant drive with the bonnet open around streets.

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

Well it depends on how often you reset your informeter. My average is quite accurate with leaf but trip is a little off. Haven't really tested it though. I find the actual leave compared to the currant usage on inform to be the same.

But my throttle seems never to go below 10% lol dunno why

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

lol I purposly didnt set these up, and the leaf screen i shut off.

250k per FULL tank is not something you wanna see lmao

Edited by AaronNM35

lol... that's 2 days to work and back for me!

I dunno how you put up with it mate

well everytime i try to get a tune onto it, i either get exited and find something else i wanna do first.

or my turbo blows lol

Because its stuck in my shed with no turbo. Cheap to run if you dont drive it. lol.

^^ and that.

Scott wish shayne for me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...