Jump to content
SAU Community

Recommended Posts

Hi guys

My name is Sloane

Ive ventured down to the woop woop place of Richmond.

Been here for a couple of months now as Im living here for work.

Originally I was living on the Gold Coast.

Im not new to these forums but havent been on here for a while since selling my R33 GTST. (photos on profile somewhere)..........

Since then I have got myself a 32GTR which im very very happy with.

long story short its just got out the workshop @ Gavin Wood's QLD after a couple of months and will be down here tommorow... YAY!!! :P

Im very keen to meet new SAU members in the NSW region and hopefully go on a few events/cruises.

here is some details & photos :D

Car:

Nissan Skyline R32 GTR 93'

Modifications:

Arias Forged Pistons

Apexi AX53B60 Twin Turbo's

Apexi Power FC

Tomei Cams

Tomei Sump Baffle Kit

JUN Oil Pump

720cc Injectors

GT-Risp Fuel Rail

Turbosmart T Boostcontroller

Pressure Regulator

K&N Pod Filters

BOV

Nismo Twin Plate Supercopper mix

Nismo Dump Pipe

Nismo Engine Mounts

Nismo 320 kmph Dash

Nismo N1 Skirts & Rear Pods

Nismo Side Mirrors

Z32 AFM's

Oil Filter Relocation Kit

Oil Cooler /w Braided Lines

HKS Piping Kit

HKS Catback Exhaust

FMIC

Ohlins Adjustable coilovers

post-39868-1267360234_thumb.jpgpost-39868-1267360312_thumb.jpg

post-39868-1267360605_thumb.jpgpost-39868-1267360641_thumb.jpg

post-39868-1267360677_thumb.jpg

When the Previous owner first bought car 6 years ago

post-39868-1267360710_thumb.jpg

Power :D

post-39868-1267360777_thumb.jpg

post-39868-1267360815_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/310117-new-to-the-area/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

why else would some one move there? lol There is another guy GTRSean who lives in richmond and is at the RAAF.. well he was, havent seen him around for a while now though.

Yeh does he own a Maroon 32 GTR???

I think he is overseas at the moment

Another Raafie, oh very good :down:

yeh another raafie......... lol

Link to comment
https://www.sau.com.au/forums/topic/310117-new-to-the-area/#findComment-5111378
Share on other sites

Hey, welcome to woop woop lol

I'm in windsor n drive a blue R34 25GT :)

cheers :down:

Oh ok cool

will wave if I see you around :D

Welcome mate,clean looking gtr you have there too.

Im not far from richmond either..And the putty rd is a good drive and close by if your not familiar with it already.

thanks mate

ok ill have a look when im free and see what the roads like :)

how often do cruises or car meets happen around us? or are they all mainly closer to the city?

Link to comment
https://www.sau.com.au/forums/topic/310117-new-to-the-area/#findComment-5113536
Share on other sites

Welcome.

why else would some one move there? lol There is another guy GTRSean who lives in richmond and is at the RAAF.. well he was, havent seen him around for a while now though.

I used to see him every now and then around castle hill/dural area.

yep he's here in dubai with me.

Ahh stuff doing one of those trips.

Link to comment
https://www.sau.com.au/forums/topic/310117-new-to-the-area/#findComment-5115777
Share on other sites

8 days to go Corrine!

four months drags on when your stuck in a fkn desert.

I know. I'm suprised you have that much access to the internet.

My partner doesn't always have the time to jump on the computer to even email.

He just came back late last year from 6 month round the world trip and wouldn't mind doing a gulf trip. *yuck*

Link to comment
https://www.sau.com.au/forums/topic/310117-new-to-the-area/#findComment-5115787
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...