Jump to content
SAU Community

Recommended Posts

Hey guys

as some of you may know, my old 3071R (which had been bought used) had recently let go and I was shopping around for another turbo. Thought about getting a 3076R as I wanted to hit my power goal of 275rwkw... but decided to stick with a 3071 to avoid any headaches...

So placed an order for a new 3071R with GCG and it showed up a few days later... I opened it and instantly thought that it did not look exactly like my old turbo... couldnt put my finger on it but I knew it wasnt the same..

so gave it to Yauvuz at unigroup to whack it in and a few hours later I get a call confirming what I had thought... The housings on the new turbo were different to the old 3071R I had fitted... the old turbo had a front housing with a much bigger intake (diameter wise) which suited my custom intake pipe and the new turbo had a different rear housing.... GCG rekon this new rear housing is 'original' Garrett and much more efficient...

So I chucked a sicky from work to get it all sorted... took it back to GCG to get the front housing off the old turbo... got it machined, polished n all cleaned up and it was fitted to the new turbo... then it turned out that the flange on the dump pipe needed to be changed to suit the new rear housing... so bought a flange too and gave it all back to Yauvuz on friday... Plan was to weld the new flange onto the dump pipe and chuck the new turbo in

So not having heard anything I gave em a buzz around 6 today and asked em how it was all going... Yauvuz said everything had been put in and said he was about to chuck it on the dyno...

So I get a call about an hour later from him... he said that the turbo made 262rwkw with the new custom dump pipe and had potential for more... This surprised me so much as my old 3071R barely made 257rwkw... so I told Yauvuz not to worry bout the extra cash and tune her for what the new turbo could give...

And I cannot believe the results..

291RWKW from a GT3071R... I have full boost by 4000RPM haha... I love it... Yauvuz did inform me that the 291rwkw run was a freak run... but its still happily putting out 285rwkw all the time...

I coudnt believe it... but then I drove the car... and Holy Shit... that extra 35rwkw makes a huge difference!

I had no idea these turbos were capable of that sorta power... I was told their limit was 270kw tops...

and this tune isnt even that aggressive either... Yauvuz said I can thrash around all day and it should all hold...

So yeh... just wanted to share... so happy with the result... was intending on selling the car but prob gonna keep it now... :down:

Link to comment
https://www.sau.com.au/forums/topic/310413-290rwkw-with-a-gt3071r/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeh will scan the dyno sheet tomorrow...

not too sure bout the size of the housing actually... will have to look into that one...

the turbo isnt the standard T25 3071 GCG advertise on their website... its T3 based... internally gated

ive had a few SR's pull that kind of number (20 psi) so yeah they definately are capable turbo's and congrats on the results, on an sr they are a little laggier than the gt2871 but just make sooo much more top end.

I'd like to have seen a pic of the back of that turbo . It sounds like your original turbo had one of those aftermarket turbine housings on it that suited the RB's original dump pipe flange .

Do you have the ID tag details of the new or old turbo ?

Good result , cheers A .

yr 3076 has full boost before 4000RPM? that wud b pretty nuts

Cool, cheers for the pic - as DP said, be interesting to see the hotside...

Yeah mine definitely has full boost before 4000rpm, I am really hoping to get it on the dyno soon and get a proper tune in so I can provide a sensible power and boost curve for it.

I can take a pic and get you details of the old Turbo... Still have that lying around...

I've got the item number of the new turbo... if you quote that to GCG, im sure u'd be able to get all the info your after

will put up the details after work

U

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...