Jump to content
SAU Community

Recommended Posts

Started shaving the bump strips the other day, there's a decent layer of bog, so will have to sand it all back to see what I've got. Going to remove the bumpers and see if I want to leave them off or replace them with early model ones.

It's not going fast by any means.

ah yeh, its the houses that take ages :action-smiley-069:

had my house to work on..... well still do haha

but got into it the last couple weekends

changed a sill panel, about to weld in a a better quarter panel

but ive been waiting for engine mounts through sam Q from rolla club for agesss

he made some up but the were touching on something apparently so i have to wait all over again

yeah thats after the study was painted

the tiles in there are a bit icky and same with the tiles in the entrance area

but will rip those up later later late, that will cost a fair bit so in no hurry

new robes go in tomorrow, that should be ace!!!

how did the draft quote come up??

i want a wall ripped out, but i think its goign to be mega #$$$

i need wheels baaaaaaaaaaaaad

import monster was kind enough to let me borrow these for the weekend. 19" Advan T6 forged wheels running 19X9 +20 fronts and 19X10 +25 rears. i dont wanna give em back :action-smiley-069: i love the fitment. wasnt a fan of the colours but the grew on me. plus i didnt have to pay anything lol

DSC_3006.jpg

DSC_3004.jpg

can someone buy these for me??? ill be your best friend

ah yeh, its the houses that take ages :action-smiley-069:

had my house to work on..... well still do haha

but got into it the last couple weekends

changed a sill panel, about to weld in a a better quarter panel

but ive been waiting for engine mounts through sam Q from rolla club for agesss

he made some up but the were touching on something apparently so i have to wait all over again

Yeah, it's going to be a very slow process - I haven't decided if I'll do enough to get it registered first, or do a complete strip and do it properly from the start. Each has advantages and disadvantages

yeah thats after the study was painted

the tiles in there are a bit icky and same with the tiles in the entrance area

but will rip those up later later late, that will cost a fair bit so in no hurry

new robes go in tomorrow, that should be ace!!!

how did the draft quote come up??

i want a wall ripped out, but i think its goign to be mega #$$$

Didn't mind the study tiles, looked alright, maybe just how they look through the camera though.

No quotes yet - have to collect stuff like certificate of title, existing plans and stuff first.

I don't have any walls to come down, I do want to add a larger door opening in a couple though, and some bigger windows

Yeah, it's going to be a very slow process - I haven't decided if I'll do enough to get it registered first, or do a complete strip and do it properly from the start. Each has advantages and disadvantages

yeah i have to do a lot of work to mine

chucking in the 20v it needs engineers cert so itll be a full rebuild

good thing is, parts are farking cheap hahaha

import monster was kind enough to let me borrow these for the weekend. 19" Advan T6 forged wheels running 19X9 +20 fronts and 19X10 +25 rears. i dont wanna give em back :action-smiley-069: i love the fitment. wasnt a fan of the colours but the grew on me. plus i didnt have to pay anything lol
you need to roll your guards a bit more. not a fan of that look, wheels will look great on a 350z, v35 or r35 GTR (maybe) with wider wheel arches but not on an R34. wrong wheels for stretched tyres etc.
you need to roll your guards a bit more. not a fan of that look, wheels will look great on a 350z, v35 or r35 GTR (maybe) with wider wheel arches but not on an R34. wrong wheels for stretched tyres etc.

major concave or dish on stretched tyres

ash you need a 235 on the front and a 245 on the back and roll your guards accordingly :action-smiley-069:

yeah i have to do a lot of work to mine

chucking in the 20v it needs engineers cert so itll be a full rebuild

good thing is, parts are farking cheap hahaha

So will my engine... but if it's already registered I can drive around for a while with the new engine without a engineers cert :action-smiley-069:

lol lucky

i bought mine unregoed

but then take my time, spend what i have to and not have to worry bout paying rego etc and then do it all in one go

gota decide on a color to, i want something thatll look nice cause there will be a lot of work going in the car

lol lucky

i bought mine unregoed

but then take my time, spend what i have to and not have to worry bout paying rego etc and then do it all in one go

gota decide on a color to, i want something thatll look nice cause there will be a lot of work going in the car

No no, it's not regoed, but I could do that first - haven't decided yet

Decided on a colour though - I think lol

major concave or dish on stretched tyres

ash you need a 235 on the front and a 245 on the back and roll your guards accordingly :action-smiley-069:

agreed, that's an oversized rim for wheel arch and it looks like you couldn't afford low profile tyres in the right width to maintain the same rolling diameter.

In layman's terms... that just looks habib spec with povo tyres in those pics.

No no, it's not regoed, but I could do that first - haven't decided yet

Decided on a colour though - I think lol

oh yeh wat color?

meh it was only for a show and shine. not like a bought it.

nah we jsut sayn if you do buy them thats what would look best :action-smiley-069:

meh it was only for a show and shine. not like a bought it.

heh, just makin sure you don't get all habib on us. otherwise we can't invite you to hang out with us cool kids anymore.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...