Jump to content
SAU Community

Recommended Posts

im using the powerfc boost kit and it works well

when you use it you get boost print out on the hand controller and the powerfc will correct based on boost as well

set and forget and away you go

set target boost, set duty to reach that level and your done

it doesnt do dual solenoid or any fandangle stuff

so if your on std turbos etc its fine

if you want 3.6kgcm2 of boost with instant scramble then get a dual solenoid unit

Ok...

So a Power FC does a boost controller built in?

i wonder how your 34R would go with 4.11 diff gears

how do you find its acceleration at the moment with std diff gears scotty

well i dont have anything to really base it on but its definitely quick. for a 6 speed the gearings are very close together. i can be in 5th doing 60km/h and still have enough pick up to get to 100km/h quicker than alot of little cars. i find first gear to be very quick and 2nd gear is the fun gear because if im on fullboost in 3rd im going well over any speed limit.

that probably didnt answer your question lol. if you have any specific questions about it i can answer.

A question for wasteland, I have never changed the pannel filter in my gtr and was thinking about doing it this weekend, I have a sticker on the airbox saying nismo filter, I was wondering if there are any markings/branding on the filter itself to let me know that it is actually a nismo/k&n filter?

the powerfc has the logic and code built into the unit for the boost control kit

but you cant use it without the sensor, harness and solenoid

the menus are on the hand controller etc

the boost kit itself includes

an additional wiring harness

a map sensor

a boost solenoid

on the the side of the powerfc is a white socket, you plug the harness in there and plug in the map sensor and solenoid

so you dont have to do any wiring or splicing etc, just plug and pray

then set boost on the menu and duty and your done

the AVCR uses the same parts but has different controller logic

the avcr has boost scramble, boost gain etc and other features

but it uses the same sensor, harness, solenoid

you can mix and match them (the parts)

No. It's a seperate add on piece.

the powerfc has the logic and code built into the unit for the boost control kit

but you cant use it without the sensor, harness and solenoid

the menus are on the hand controller etc

the boost kit itself includes

an additional wiring harness

a map sensor

a boost solenoid

on the the side of the powerfc is a white socket, you plug the harness in there and plug in the map sensor and solenoid

so you dont have to do any wiring or splicing etc, just plug and pray

then set boost on the menu and duty and your done

the AVCR uses the same parts but has different controller logic

the avcr has boost scramble, boost gain etc and other features

but it uses the same sensor, harness, solenoid

you can mix and match them (the parts)

I see, cool thanks!

nah most agents drive bmws/lexus/merc/audi well the decent ones the average ones drive mazda's/honda's etc

i just need something suitable for towing and i dont see myself in a 4x4 could get a lexus gs430 4.3ltr v8 would probably do the job but not sold on teh look of em

i rkn ve's look tits.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...