Jump to content
SAU Community

Recommended Posts

Hey all

I've got an osgiken r3c triple plate in my gtr.

Very happy with it's general feel, although I'll be going back to a NISMO twin once this triple is worn out.

So, my question; I know solid centres aren't gearbox friendly, but on a hard launch (eg at a drag meet at WSID), just how unfriendly are these clutches?

I'd like to take the car to WSID once the tune is finished. I'm more of a corners/hills sort of guy instead of drag but I'd like to do it once after the tune so I can say I gave it a go. It's got 400rwkw with lots more boost and ignition to come, so it's all expected to finish around 420awkw. I'm thinking it should do a 10???

Thanks!

You will need to hold the handbrake and load the drivetrain with the clutch to avoid the harsh impact of the launch using the R3C (or any other Jap triple). However, with a stock box, I hope it lasts. I broke 3 boxes with a HKS triple due to its harshness on the driveline. I found that I had to ease it into third to avoid breaking the box.

And yes, 420awkw should get you a 10...driver and gearbox dependant. :)

Oh, also it's a stock box in very good order....which I don't want to have to replace after a drag meet

When I bought my GTR, the g-box was replaced in J land (on warranty from the auction yard) with a new box. 3 race meets later 3rd gear went bang. I had a brand new R3C installed as soon as the car hit aus. I was racing around 400rwkw and was into the low 11's before the box went.

I was aware of the 3rd gear weakness, so I was taking it super easy.

GL... your box will need it.

J.

When I bought my GTR, the g-box was replaced in J land (on warranty from the auction yard) with a new box. 3 race meets later 3rd gear went bang. I had a brand new R3C installed as soon as the car hit aus. I was racing around 400rwkw and was into the low 11's before the box went.

I was aware of the 3rd gear weakness, so I was taking it super easy.

GL... your box will need it.

J.

Yeah the 3rd gear is very unfriendly with big power/torque...mine broke accelerating out of turn 9 at the creek...not on shift. So even if you shift it like a baby it may shatter rolling back on the power after its shifted. Mine was even cryo treated...GTR dogboxes can be hired for around $500 a meet from Red R Racing i believe. :(

Edited by Swiper the Fox

it's so hard to say if it will break or not. I ran my old grey gtr for a couple of years with 280rwkw and a OS tripple in it. did plenty of savage "dial up 7,000rpm and just drop the clutch" type launches and didn't have any box problems at all. but of course you have a fair bit more power. personally I say go for it. not much fun having a car you can't do what you want in it. if it breaks then fix it. :)

GTR dogboxes can be hired for around $500 a meet from Red R Racing i believe. :D

Now thats an awsome Idea... ha ha ha. Especially when you charge 500 for instalation and 500 for removal. Whats with the new screen name Paul?

personally I say go for it. not much fun having a car you can't do what you want in it. if it breaks then fix it. :laugh:

... then repeat.

Drag racing or not, with well over 400kw at the treads it's likey to go pop. Even if it dosn't, it's no fun having to worry about "when or if" it goes. like beer baron said... it's not fun if you cant use it.

I'd start saving for a new box, or turn it down to help it live.

J.

Ok thanks everyone for the replies

I've decided to go for just one off street drag session (the weeknight ones), and just see how it does

I'm not going to launch, just hold revs around 2000rpm with the clutch starting to grab and the handbrake up, then let go of the handbrake and stand on the loud pedal through each gears. No flat changing either, I know that's not optimal for time but the trap speed *should* be respectable

Although the stock input shaft are known to break after a while on a big hp car, I don't think you'll have to many problems with a higher rpm launch. 1st and 2nd are quite strong... hell Last weekend I watched a 650bhp GTR limmiter launch 5 or 6 times and bang through 1st and 2nd... very easy on third and ripped through the rest. Eventually 3rd broke.

Changing gears like granny wont substitute insufficient metalurgy. It's just easy on the cyncro's...

If you drive a 430rwkw GTR with a stock box and an R3C, expect 3rd to go... simple as that.

I say drive the thing properly and ease the clutch/power in at 3rd gear. Cross you fingers and hope your lucky.

J.

im kinda in the same boat. 400kw atm but will be around 430-440 next tune but with a Nismo super coppermix twin Competition clutch (rated to 740ps) would this be less harsh on the gearbox?

Although the stock input shaft are known to break after a while on a big hp car, I don't think you'll have to many problems with a higher rpm launch. 1st and 2nd are quite strong... hell Last weekend I watched a 650bhp GTR limmiter launch 5 or 6 times and bang through 1st and 2nd... very easy on third and ripped through the rest. Eventually 3rd broke.

Changing gears like granny wont substitute insufficient metalurgy. It's just easy on the cyncro's...

If you drive a 430rwkw GTR with a stock box and an R3C, expect 3rd to go... simple as that.

I say drive the thing properly and ease the clutch/power in at 3rd gear. Cross you fingers and hope your lucky.

J.

could not agree more. 100% spot on. big launches wont be the problem. if it's got real big power it will eventually just peel the teeth of 3rd. no matter how you launch or how you shift. I mean you are still going to use full throttle in 3rd right? :blink:

in the big power cars it's hardly the launches that kill boxes. it's just the power. at launch all you get is a bit of wheel spin and off you go. launch it.

+1 on the above.

The lack of a sprung clutch will mean more savage gear changes and 3rd gear is known o be the weak link in the 5-speed GTR boxes. My cousin used to thrash the guts out of his R32, limiter launches and burnouts etc. It was only when he fitted a solid centre triple plate that the box decided to go the first time he hit it in 3rd.

Put simply, solid triples+stock box = boom

If you're too worried about breaking the box, Steve, I am more than happy to race it for you and if the box breaks, I will replace it with one of my spares :blink:

Hahaha Charlie thanks for the offer! I've got a spare box here, maybe you can put your 6spd in and take it for a run hahaha

it should be finished tuning today

yes I'll use full throttle in every gear, so far the box has done very well from when the car had the single on it (power delivery was pretty savage)

it's got a profec b spec 2, I'll call the tuner now and see what can be done

at the end of the day it's not made for drags, it's made for hills, but yeah a nice time would be a bonus :cool:

Are you saying that you want to buy my six speed? :cool:

Oh, and I call BS, Steve. You WANT a quick time, otherwise you wouldn't waste your time running the car at the drags :)

When are you going? A couple of fairly quick GTR's will be there tonight.

Im about to go get the car from the tuners (got to run out the door now)

Wont run it tonight, but i might go for a look. Who's going to be there?

Oh and yeah, i do want a quick time - who wants slow times?! lol

No i dont want to buy the 6spd, just use it hahaha :cool:

Ive got ORC Twin soild centre in my gtr, its lasted heaps of limiter dumps on the street and smashing it into 3rd, i mite stop doin that now ive read this thread lol, im only making 312awkw not 400+ like stevo's monster i seen this thing at unigroup dyno day...... 400kw @6k rpm : D ANIMAL

Ok, ive given it a bit of a hard time tonight, lots of second and third gear. All seems fine. I might run it in the next 3 weeks.

Power is now 455kw. Anyone know what sort of time that should equate to?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...