Jump to content
SAU Community

Do Want.

evil_weevil
 Share

Recommended Posts

  • 2 weeks later...
Birds Grand Master

Birds

Posted
Posted
Meh its nice...but its a porsche. I would love to have a design job at that company.......Sit on ya ass and do nothing.

LOL. You get to play with the headlights every couple of years. They must have shat themselves when they found out a 4WD was on the cards - but then - they basically chucked a 911 on stilts from the front.

Link to comment
https://www.sau.com.au/forums/topic/311488-do-want/#findComment-5147510
Share on other sites
Kujotk Grand Master

Kujotk

Posted
Posted

thats true, the cayman is a design of the boxter with a little more power and a hard roof,

the cayene is a 996 carrera 911 jacked up,

and the Panamera is a 911 stretched out.

That V8 engine in the Ruff is the same as the panamera isn't it? And how the Fk did they get it to fit in the back there, good luck doing an engine out rebuild after 5 years of racing, without having to demolision saw the cars body lol.

And you may think its a beetle, designed by hitler, who cares a great car is a great car and nothing can make it bad (even though the colour is alittle wacky)

Link to comment
https://www.sau.com.au/forums/topic/311488-do-want/#findComment-5147722
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      After market rear camber arm adjustment

      By sonicii · Posted

      How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...