Jump to content
SAU Community

Recommended Posts

Due to some people asking, I will have another group buy of these batteries.

I have found some sealed batteries at a very good price, they are simillar to odyssey but don't have the steel case . I put one in my old 33GTR in 2004 , I sold the car some years ago to a guy that I know and the Battery is still going , car has alarm and a tracker in it . I have the same in my 34 GTR and a few others in this forum have them.

I compared the specs of the battery to those of the odyssey 1200 and they appear to be almost identical in every way. Even the dimensions are the same.The only difference is the steel jacket on the odyssey.

They are 20x17x17 cm , it fits it the r33 but you need another bracket , same with the 34 GTR too.

This group buy will be open from now until the 15th of April. The price is $200+ delivery , about $22 registered to Melbourne and Brissy.

Anyone interested let me know via p.m. you don't have to pay up front , you pay when I get them .

post-5240-1268397615_thumb.jpg

post-5240-1268397645_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/311699-sealed-batteries/
Share on other sites

bugger just bought one of these (the expensive version) because I hadn't seen you post a GB for a while.

For anyone looking into these, I bought one about 3 years ago for a car and its still going strong.

Can you get any smaller sizes, I want to get one of these into the race car

bugger just bought one of these (the expensive version) because I hadn't seen you post a GB for a while.

For anyone looking into these, I bought one about 3 years ago for a car and its still going strong.

Can you get any smaller sizes, I want to get one of these into the race car

Hi Duncan, how are you doing?

Yes I can get the smaller ones mate , let me kmow what size you want , the next size down is a 26 amh. They make them the same size as odyssey.

  • 3 weeks later...
Whats the cca?

Brand?

Any specs?

Here you go ..

40 Amp Hour 12 Volt, 1200 ca

Size: 197 (L) x 165 (W) x 170 (H) mm

Charge current: 4A for 10 to 14 hours

Discharge Current: 2A for 20 hours

Capacity:

20hr rate: (2A) 40.0AH

10hr rate: (3.8A) 38.0AH

5 hr rate: (6.8A) 34.0AH

1 hr rate: (24A) 24.0AH

Int resistance - fully charged: 10mohms

Constant Voltage Charge

Initial Charging current: < 12A

Cycle:

Voltage: 14.40V ~ 15.00V @ 20°C

Temp coefficient: -30mV/ °C

Standby:

Voltage: 13.50 ~ 13.80V @ 20°C

Temp Coefficient: -20mV/ °C

Weight: 14.0kg

post-5240-1270206088_thumb.jpg

I LOLed when a customer brought one back saying "the battery shop told me its no good for my car" and they proceeded to sell him an optima for twice the price

they must be shit since 5 of my other customers use these batteries perfectly and have done so for years a couple years now.

stupid battery shops LMAO

I LOLed when a customer brought one back saying "the battery shop told me its no good for my car" and they proceeded to sell him an optima for twice the price

they must be shit since 5 of my other customers use these batteries perfectly and have done so for years a couple years now.

stupid battery shops LMAO

  • 2 weeks later...

Couple of questions please:

1. Mods needed to make it fit into your R34 GTR. Is it just the battery cover? Did you have to extend the battery cables eg., +ve from fuse-box, or change the battery tray, etc? Also, did you have to remove the entire back wall of the boot to install it, or just the strut brace?

2. How many years warranty does it come with, and if something goes wrong, how does warranty work assuming there are no Victorian resellers?

Thanks.

Question as well.

Whats the difference between one of these and a Supercharge Gold? 36 series.

3 year warranty replacement warranty and for some reason, fits perfectly in my 34.

Couple of questions please:

1. Mods needed to make it fit into your R34 GTR. Is it just the battery cover? Did you have to extend the battery cables eg., +ve from fuse-box, or change the battery tray, etc? Also, did you have to remove the entire back wall of the boot to install it, or just the strut brace?

2. How many years warranty does it come with, and if something goes wrong, how does warranty work assuming there are no Victorian resellers?

Thanks.

No mods needed to fit on my R34 GTR but I have a M-Spec and they come with the bigger battery . On none M-specs you need a wider top bracket ( 7" instead of your standard 5"), there is another hole there to fit the wider bracket, cables should reach, your battery tray will be 5" so if you want to replace it you need a 7" but its a sealed battery, most people don't use the tray.

To replace the battery in the 34 R you need to remove the steel backing and undo one side of the strut brace.

They have a one year replacement warranty but you have to send it back to me, never had any back so far .

Owgasm,

They are different, as far as I know they ( supercharge gold) are calcium positive plates and a mixture of calcium and lkead negative plates, correct me if I'm wrong. I'm not aware of the specs on the 36 series mate . I don't know what kind of 34 you have but if they fit on standard 34 R's they must be smaller than these ( 5" same as the stock battery) . Some normal 34 R's have the bigger battery as an option ( winter option) All UK spec cars have it as well.

  • 1 month later...
hey buddy just wondering if u got ani left for sale to melb 3020 and would dis fit a s1 r33?

If you are not in any great hurry I'll do another buy . How soon do you want it?

  • 2 weeks later...

sorry to have to do this, but jaycar are selling these batteries for $199 - http://www.jaycar.com.au/productView.asp?I...mp;SUBCATID=904

as a side note, i ordered one of these batteries off wrxhoon about a year ago and its still going strong :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...