Jump to content
SAU Community

R34 Gtr

GTRVS2
 Share

Recommended Posts

GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
Any symptoms? Splutter? Missing?

Had anything in or out?

Tried to clean anything when all of this happened?

Why was it running even at 0.5bar when it should have been 0.8 on a squirt?

changed the oil not long before it happened and the car has always been runnig on 0.5 since i got the car last year.

other than that the car is running good.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5134107
Share on other sites
choyda Veteran

choyda

Posted
Posted

If you are going off the stock MFD, can you tell what it reads as idle?

Have a listen at idle in the engine bay for hissing too. Theres a thin vacuum hose that goes from the rear of the engine to the sensor pickup near the driver side strut tower. Have a feel for leaks.

Mine split ever so slightly near the join. Symptom was almost no vacuum on the boost gauge and had the same issue when giving a slight boot. You would also occassionally see a bit more fuel in your exhaust.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5138199
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
If you are going off the stock MFD, can you tell what it reads as idle?

Have a listen at idle in the engine bay for hissing too. Theres a thin vacuum hose that goes from the rear of the engine to the sensor pickup near the driver side strut tower. Have a feel for leaks.

Mine split ever so slightly near the join. Symptom was almost no vacuum on the boost gauge and had the same issue when giving a slight boot. You would also occassionally see a bit more fuel in your exhaust.

hey mate you were right .the pipe going from the rear of the engine to the boost sensor split right behind the engine.thanks a lot for your help.

it is boosting upto 1bar now.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5142223
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
One thing that can do it is a collapsed cat. It happened on my last car.

hi mate i checked the cat today and found the exhaust was leaking from both sides, but the cat it self was ok. i changed the gaskets but it ends up it wasent the problem. i found the pipe that goes to the boost sensor was broken from behind the engine. but thanks for all your help.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5142227
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

sounds like you got it sorted, but for workshops i would highly recommend Status Tuning (soon to be Chequered Tuning) and also of course Race Pace Motorsports if you need the car checked.

Any mods yet? Trent (Status Tuning) can work some real magic if you need something tuned :)

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5146776
Share on other sites
GTRVS2 Apprentice

GTRVS2

Posted
  • Author
Posted
sounds like you got it sorted, but for workshops i would highly recommend Status Tuning (soon to be Chequered Tuning) and also of course Race Pace Motorsports if you need the car checked.

Any mods yet? Trent (Status Tuning) can work some real magic if you need something tuned :cool:

no i havent done anything to the car yet, i whant to pay it of first. wher are those work shops based do you now?

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5146944
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

south dandenong and bayswater, off the top of my head - Status is deadset easy to get to, very close to EastLink. Don't know about RacePace.

doesn't really matter anyway. If it takes a while to get to a good tuner, it takes a while to get to a good tuner. It is EASILY worth the time/effort to take your car to a place that knows what they're doing.

Link to comment
https://www.sau.com.au/forums/topic/311923-r34-gtr/#findComment-5147103
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...