Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

i hate you

lol, i think i have to thank you, i cant remember if it was you that said dont buy the r33 gtr wait and save up a bit more to get a r34 gtr. i posted the question a while ago in the vic wasteland section so if it was you thanks because i would have been in a r33 gtr instead of getting this.

then i would of said you a dick :blink:

good buy haha, i think that was my advice to myself i may of shared why settle for second best i say when you can have THE best

so true, why settle for a car that you wont be 100% happy with. its all about patience and hard work to save up enough to get the right one that you will be happy with. or else everytime you see one on the road you will say, i wish i saved a bit more and got that.

yep, all i have to do is sit on my arse and pay the bills lol.

i ran the car through nissan fast and its one of the first r34 gtr's to leave the factories. i didnt know they released that colour so close to the gtr's release.

What's the paint code?

LV4 (R34)Midnight Purple II (Chromalusion Tinter KK760 Absolute Purplene & Vilot Pearl)

LXO (R34)Midnight Purple III (Chromalusion Tinter KK700 True Blazberry Prizm & 2 pearls red & Violet)

Has to be one of these...

From memory, Midnight Purple, yes it was a special release, colour wise...

As for,

EY0 - Silica Breath <--- M-Spec / M-Spec Nur

JW0 - Millennium Jade <--- V-Spec II Nur / M-Spec / M-Spec Nur

KYO - R34 Z-Tune Special Silver <--- Z-Tune (which are all based on V-Spec II's).

These were more so special releases towards the car.

yep, all i have to do is sit on my arse and pay the bills lol.

i ran the car through nissan fast and its one of the first r34 gtr's to leave the factories. i didnt know they released that colour so close to the gtr's release.

Thats why I was confused.

If it was available, I thought it was for the higher models at the beginning.

What's the paint code?

LV4 (R34)Midnight Purple II (Chromalusion Tinter KK760 Absolute Purplene & Vilot Pearl)

LXO (R34)Midnight Purple III (Chromalusion Tinter KK700 True Blazberry Prizm & 2 pearls red & Violet)

Has to be one of these...

From memory, Midnight Purple, yes it was a special release, colour wise...

As for,

EY0 - Silica Breath <--- M-Spec / M-Spec Nur

JW0 - Millennium Jade <--- V-Spec II Nur / M-Spec / M-Spec Nur

KYO - R34 Z-Tune Special Silver <--- Z-Tune (which are all based on V-Spec II's).

These were more so special releases towards the car.

LV4 is the paint code it says on Nissan fast.

nice work dude!

what are the details?

km's? was it from auction or a yard? any mods at all? when will she be on a boat?

crazy colour.

PM price too please :blink:

the km is close to 100k, it was bought at auction as a grade 4 and the interior is a grade B. from what i can see there are no mods other than the nismo dash. and it should be on the boat soon. pm sent also. :)

wow thats awsome! im looking at 33 GTRs atm.. would love a 34 but seem to be a bit out of the range when i was looking recently..

any chance you can PM me as well? hate to be annoying :blink:

i absolutely love that colour dont think ive ever seen it

  • 4 weeks later...

Must be hard going to sleep at night. I remeber when I was waiting to get the key to my car,

which only took me 7 days comparing to your a lot longer wait. I had to wait for my car to

be comply and register, remember counting the day and go to bed early hoping that the next

day will come sooner.

Congrats by the way :)

Must be hard going to sleep at night. I remeber when I was waiting to get the key to my car,

which only took me 7 days comparing to your a lot longer wait. I had to wait for my car to

be comply and register, remember counting the day and go to bed early hoping that the next

day will come sooner.

Congrats by the way :)

believe me i know the feeling.. just for me i was meant to get it in a few days but ended up taking a few weeks.. damn it was painful - worth it in the end

Must be hard going to sleep at night. I remeber when I was waiting to get the key to my car,

which only took me 7 days comparing to your a lot longer wait. I had to wait for my car to

be comply and register, remember counting the day and go to bed early hoping that the next

day will come sooner.

Congrats by the way :)

yes it is hard, but i try to keep my mind off it as much as i can. also i keep my mind busy by trying to sell my 34 gt-t.

i still hate you!

lol, that hurts my feelings :) . and i was about to let you drive it for a week but not now.

but seriously when i get it id be more than happy to take u for a drive, my cars first debut looks like should be at DECA either competing or volunteering not sure yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...