Jump to content
SAU Community

Recommended Posts

  • Replies 186
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...

How is it all going Steve? Have you got the new exhuast one yet?

Mine is going E85. I need to speak to Yavuz in regards to injectors and the power FC. I dont really want to change the ECU but I want to be confident that the FC can handle the massive injectors at idle and what not. 2 bar here we come!

Mines going ok, the guy making the exhaust has had so much stuff come up there's been no progress yet so the GTR has basically been sitting around still on the 455kw tune. I've driven it a tiny bit but only backstreets etc no macpass or nasho trips yet

ID2000's are seriously the best injectors. The throttle control they've got compared to the old 1000's and even some big brand injectors is just awesome. Downside is the cost, but that's what big power costs I guess haha

I think I saw you the other night, I was at TC Brothers and a super clean r33 went past, it was Thursday around 9pm or so

The great thing about Yavuz is that he never pushes too hard. I've told him to push it as far as he can for the next tune cause its on e85 he may aswel. Did your intercooler arrive yet?

Oh also the rb26 injector plugs didn't fit, so 2JZ ones went on. No biggie, I think it was $26 or so?!

The issue is the distance from the plug to the injector, not the actual face of the plug if that makes sense

Mines going ok, the guy making the exhaust has had so much stuff come up there's been no progress yet so the GTR has basically been sitting around still on the 455kw tune. I've driven it a tiny bit but only backstreets etc no macpass or nasho trips yet

ID2000's are seriously the best injectors. The throttle control they've got compared to the old 1000's and even some big brand injectors is just awesome. Downside is the cost, but that's what big power costs I guess haha

I think I saw you the other night, I was at TC Brothers and a super clean r33 went past, it was Thursday around 9pm or so

The great thing about Yavuz is that he never pushes too hard. I've told him to push it as far as he can for the next tune cause its on e85 he may aswel. Did your intercooler arrive yet?

My cooler has been sitting in my room for months. I am just so damn lazy to put it on. Definately was not me at TC Bro's. I went to wakefield and cracked both my front rotors. My car is up on stands... got its new rotors on but just waiting for pads to arrive to chuck them on.

As for the injectors. Cost? Pfft. The GT-R is the biggest money pit ever... Whats a little bit more. I got to (well want to) run a surge tank... but I might stick that under the car. Not too keen on having it in the boot.

Yavuz. Yeah his tunes are (well my current one) is rock solid. Never knocks or carry's on. This E85 tune I want to see what she makes. I will be getting a 98 tune done also. The E85 conversion is a bit of a comparison done for a Uni final assignment. So it should be good to get a DIRECT comparison between the 2 fuels on the same dyno, tuner, car. I dare say my exhaust is going to hold me back a tad. At it's smallest point it is 80 mm. We will see what happens.

On a side note. I did hear on the radio today that by next month Caltex will have 10 servo's in Sydney with E85. Thats tip top! I knew it was going to be by the end of the year.... but its handy with them being around so soon!

Any idea of when the exhaust will be ready?

Would love to see it at WSID one night.

On a side note. I did hear on the radio today that by next month Caltex will have 10 servo's in Sydney with E85. Thats tip top! I knew it was going to be by the end of the year.... but its handy with them being around so soon!

if that is the case - it will be time for me to do the switch to e85, otherwise my fuel system is complete overkill for 98 (and a bit of a waste)!

i also run 3 x 044's like steve

My cooler has been sitting in my room for months. I am just so damn lazy to put it on. Definately was not me at TC Bro's. I went to wakefield and cracked both my front rotors. My car is up on stands... got its new rotors on but just waiting for pads to arrive to chuck them on.

As for the injectors. Cost? Pfft. The GT-R is the biggest money pit ever... Whats a little bit more. I got to (well want to) run a surge tank... but I might stick that under the car. Not too keen on having it in the boot.

Yavuz. Yeah his tunes are (well my current one) is rock solid. Never knocks or carry's on. This E85 tune I want to see what she makes. I will be getting a 98 tune done also. The E85 conversion is a bit of a comparison done for a Uni final assignment. So it should be good to get a DIRECT comparison between the 2 fuels on the same dyno, tuner, car. I dare say my exhaust is going to hold me back a tad. At it's smallest point it is 80 mm. We will see what happens.

On a side note. I did hear on the radio today that by next month Caltex will have 10 servo's in Sydney with E85. Thats tip top! I knew it was going to be by the end of the year.... but its handy with them being around so soon!

Any idea of when the exhaust will be ready?

Would love to see it at WSID one night.

Laziness hey, I know where you're coming from then haha! As soon as I get back from work ive got enough energy to eat then straight to bed

You know what comparison I found interesting when I was there? It had 1000's in it and on e85 was struggling to break 400rwkw. Eventually it did 403 by adding boost very cautiously just cause it was a dyno day. Injectors on 98 were at around half DC. As soon as the e85 went in the DC went to 99%! so much for an extra 30%, it just maxed out straight away! The ID's fixed the problem but my car at least destroys that theory of 30% more flow needed.

Let me know when you go to the track and I'll come along. I'm dying to drive it fast again

Exhaust? Id love to know. It's not a priority for the guy making it right now. Ive asked Yavuz to get the tps gear in so as soon as the exhaust is done I'll take it all to him to see just how far the motor can go with the stock port head.

End of the day the new motor for it is the real one that matters, this current one is fun for now though. I should have pics of the crank in 2 weeks time

To be honest I'm worried about the box breaking, otherwise I wouldve gone to wsid already. The situation as I see it is that it's going to run too fast and get booted for not having all their safety gear (which I'm sure was designed for 40 year old rotaries with 800hp and tubbed etc), I'll never fit that safety gear so I'm banned. Id rather do a few runs at the texi with a v box (whyever they're called), yes it's not as official as the wsid timeslip but I really would like to give the big motor a go at wsid and after that I'll happily not go back :/

Laziness hey, I know where you're coming from then haha! As soon as I get back from work ive got enough energy to eat then straight to bed

You know what comparison I found interesting when I was there? It had 1000's in it and on e85 was struggling to break 400rwkw. Eventually it did 403 by adding boost very cautiously just cause it was a dyno day. Injectors on 98 were at around half DC. As soon as the e85 went in the DC went to 99%! so much for an extra 30%, it just maxed out straight away! The ID's fixed the problem but my car at least destroys that theory of 30% more flow needed.

Let me know when you go to the track and I'll come along. I'm dying to drive it fast again

Exhaust? Id love to know. It's not a priority for the guy making it right now. Ive asked Yavuz to get the tps gear in so as soon as the exhaust is done I'll take it all to him to see just how far the motor can go with the stock port head.

End of the day the new motor for it is the real one that matters, this current one is fun for now though. I should have pics of the crank in 2 weeks time

To be honest I'm worried about the box breaking, otherwise I wouldve gone to wsid already. The situation as I see it is that it's going to run too fast and get booted for not having all their safety gear (which I'm sure was designed for 40 year old rotaries with 800hp and tubbed etc), I'll never fit that safety gear so I'm banned. Id rather do a few runs at the texi with a v box (whyever they're called), yes it's not as official as the wsid timeslip but I really would like to give the big motor a go at wsid and after that I'll happily not go back :/

Thats interesting with the injectors. I have read that "whatever you think is enough with E85... go the next size up".

Next time we go I'll def give you and Marko a yell. Although I would love to do EC. Wakefield espeically with the power that our cars make I find you spend too much time in the lower gears. It did feel great grabbing 4th at 8500 hauling arse down the main straight!

With the box. Be careful. I broke mine on the street with not a very hard shift at all. It was only 11,000 kms old. Was not impressed. Now I have a OS box to try and break. Knock on wood that does not happen!

Maybe we should all go on the same night and have 3 GTR's getting booted out 1 after another. haha

if that is the case - it will be time for me to do the switch to e85, otherwise my fuel system is complete overkill for 98 (and a bit of a waste)!

i also run 3 x 044's like steve

My fuel system is almost there then. I have 2 x 044s to feed the rail and a walbro in tank pump. E85 looks like the way to go, shame we wont get it at the pump for a while here in Tassie...

Thats interesting with the injectors. I have read that "whatever you think is enough with E85... go the next size up".

Next time we go I'll def give you and Marko a yell. Although I would love to do EC. Wakefield espeically with the power that our cars make I find you spend too much time in the lower gears. It did feel great grabbing 4th at 8500 hauling arse down the main straight!

With the box. Be careful. I broke mine on the street with not a very hard shift at all. It was only 11,000 kms old. Was not impressed. Now I have a OS box to try and break. Knock on wood that does not happen!

Maybe we should all go on the same night and have 3 GTR's getting booted out 1 after another. haha

im in paul - wouldnt mind doing the 1/4 mile again as well...

see if i can better my previous run with 320awkw & did a 11.1sec

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...