Jump to content
SAU Community

Recommended Posts

Such a nice looking engine, please tell me your going to clean up the throttle bodies and the throttle body plate some more :( I know i should keep my negative comments to myself but it would look so much nicer if they were bead blasted and looked like new!!!!

Also could i suggest upgrading the oil pump to a Tomei pump. An N1 probably wont last too long on an engine with that sort of power.

Will a 6262 make that much power at 25ish psi of boost? 600rwhp is 450ish rwkw.... i am running a 6766 and make 485rwkw at 25psi with a pretty damn healthy RB26

I just chucked some 264 9.7 cams and upgraded valve springs In

Waiting for 2000 injectors then it's going for a retune on the 25th jan see what we can get out of the 6266 now as it was running out of fuel last tune

Such a nice looking engine, please tell me your going to clean up the throttle bodies and the throttle body plate some more :( I know i should keep my negative comments to myself but it would look so much nicer if they were bead blasted and looked like new!!!!

Also could i suggest upgrading the oil pump to a Tomei pump. An N1 probably wont last too long on an engine with that sort of power.

Will a 6262 make that much power at 25ish psi of boost? 600rwhp is 450ish rwkw.... i am running a 6766 and make 485rwkw at 25psi with a pretty damn healthy RB26

yeah, itbs, and runners are in the shop as we speak to get cleaned up. car will be in the drag occasionally, mainly street use and not a lot of abuse. was told that N1 with a got collar should last but def will consider getting a better pump

I've got a lot of evidence to show otherwise?

How early man? It's a lot of turbo to have breathing that heavy, that early, on a 2.6.

I can't picture your result here and now but I know its impressive. Remind me when it's making that sort of boost (1 bar).

I'm just blind estimating. I come from a sr20det swap with a gtx3071 and I didn't see 15 psi till past 5.5k rpms. If SimonR32 can show some proof of the spooling I'd be happy with the 6262. Now if the 6266 is behind just a few hundred rpms i will consider it as well.What rear housing? Would like to see the difference of 15 psi vs rpms between the 6262, 6266 on a 2.6 with similar cams. Thanks for the help guys. There is not many people with rb26 in my area so ita hard to get advise

I'm just blind estimating. I come from a sr20det swap with a gtx3071 and I didn't see 15 psi till past 5.5k rpms. If SimonR32 can show some proof of the spooling I'd be happy with the 6262. Now if the 6266 is behind just a few hundred rpms i will consider it as well.What rear housing? Would like to see the difference of 15 psi vs rpms between the 6262, 6266 on a 2.6 with similar cams. Thanks for the help guys. There is not many people with rb26 in my area so ita hard to get advise

This is a log I uploaded a while ago, I wasn't actually testing just driving but as you can see it makes 1 bar in 3rd gear at about dead on 4000rpm

3rdgear_zps42d4c17f.jpg

I'm just blind estimating. I come from a sr20det swap with a gtx3071 and I didn't see 15 psi till past 5.5k rpms. If SimonR32 can show some proof of the spooling I'd be happy with the 6262. Now if the 6266 is behind just a few hundred rpms i will consider it as well.What rear housing? Would like to see the difference of 15 psi vs rpms between the 6262, 6266 on a 2.6 with similar cams. Thanks for the help guys. There is not many people with rb26 in my area so ita hard to get advise

Jose, if you were seeing boost that late for a 3071 on an SR then there was something either faulty with your car of you had a bad wrong combination.

I have never seen a twin scroll 6262 on any RB26 not have 15psi by 4000rpm on ethanol. I'm sure you'll be happy with one on a SR, just keep in mind the 6262 is capable of power beyond what is safe on 98 octane (for an SR20.)

thanks for the advise guys,after looking at SimonR32 chart im sure ill be reall happy with it. Ordered the precision 6262 ball bearing T4 .84 divided housing. do you guys use a restrictor for the oil feed? I will update after tune. I'm not sure if I had a bad combination on the sr but I just got frustrated with it and that's why im going RB26 this time.

That wouldn't surprise me too much but the T78 is a smaller turbo so not comparable. Compare a T88 with the T51R and the T51R response will look a lot better, then no doubt go to a modern 67mm billet turbo and things start getting quite interesting <br /><br />Sent from my GT-I9505 using Tapatalk<br /><br />

do you guys use a restrictor for the oil feed?

The fitting in the turbo has a restrictor built into it so you shouldn't need to fit one. Someone please correct me if I'm wrong though

Just out of curiosity what is the correct thread for the oil feed fitting? I found 1/8 npt didn't seem to wind in as far as I'd like

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...