Jump to content
SAU Community

A Warning To All.

D-G

By D-G,
in Victoria

 Share

Recommended Posts

W0rp3D Grand Master

W0rp3D

Posted
Posted
Buy your own :P

Even when I don't have a workshop I'll be installing one in my garage - it's worth every friggen penny.

well then you need to give me a garage to put the hoist your going to give me in ;)

  • 3 weeks later...
BeEnAr Experienced

BeEnAr

Posted
Posted
you could buy a decent single phase secondhand hoist at the auctions for around that.

Yes this is true, but I don't have the space to put in a hoist plus if you bought something like these then you could take them with you if you moved house a lot easier than a hoist.

I'd love a hoist but these are just another alternative. Oh and I'd rather buy them than make them, I dunno about you guys but i'm pretty sure I wouldn't get under any car being supported by something the I made myself lol

funkymonkey Grand Master

funkymonkey

Posted
Posted
Yes this is true, but I don't have the space to put in a hoist plus if you bought something like these then you could take them with you if you moved house a lot easier than a hoist.

dig a pit in your garage?

that ramp thing doesn't look too safe/sturdy. also, if you're servicing brakes/wheels (which is 90% of the time my car goes up in my driveway instead of the workshop) that ramp is useless by its design.

teK-- Collaborator

teK--

Posted
Posted

"Sergeant Geoff Exton says the man's wife was in the car at the time of the accident. " that is absolutely terrible :D

I built some of those timber ramps (sleepers stacked on top of each other so they are like steps). It inspires much more confidence than any jack stand or spare tyre, especially when using the big breaker bar when the car sometimes sways side to side).

UNR33L Grand Master

UNR33L

Posted
Posted

When dad built our house he thought ahead and built a pit in the garage, its pretty cool probably about 1.5m deep and you just stand in it and work on the car if needed, for oil changes and shit i don't bother though i just use some blocks of wood and do it on the street as my car cant get in the garage without scraping the front bar like a mofo.

RCHOO Grand Master

RCHOO

Posted
Posted
I built some of those timber ramps (sleepers stacked on top of each other so they are like steps). It inspires much more confidence than any jack stand or spare tyre, especially when using the big breaker bar when the car sometimes sways side to side).

I built the same setup ..Its the way to go.

If your working under your car and you say to yourself ( shit i hope this dont fall) Get out.

It may only take a extra 30 seconds to make it safer.

teK-- Collaborator

teK--

Posted
Posted

A few things I have also learnt through various mishaps:

1) If in a rush the only place to never try and save time is getting the car off and back onto the ground. (crushed a power steering steel hose when jack slipped off crossmember. On boxing day, with shops closed for another 4 days).

2) Like Rchoo said, if you don't feel safe under the car then GTFO. Either that or you will probably make mistakes because you are so nervous.

3) Working with poor lighting, foggy head, hangover etc. You will make mistakes. Reschedule for another day.

4) Not having proper tools for the job. Make sure you have alternative transport to go to the shops :thumbsup:

I am guilty of all 4 and only managed to damage the car and make the entire job more costly and lengthier. No more shortcuts hereon I don't want to end up like the poor guy on the news...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For your application, where you'll be at that 1/2" size or perhaps larger, yeah, excellent. Although not if you need a tight bending radius anywhere, because the corrugated stuff is not anywhere near as flexible as rubber/teflon cored stuff. But for turbo oil lines? No. Too big. They just don't do the corro stuff down at the ~1/4" ID size that you'd want, and if they did the OD of it would probably be a bit too fat for fitting it into the tight spaces available. I use hoses like that all the time for fuel gases (LPG, NG) and liquid fuels (HFO, diesels, waste oils). When we did the London Olympic cauldron, with the 204 individual burners on it, we had miles of the stuff (although a lot of that was teflon core). A bunch of that crap is still cluttering up the workshop, more than 2 years later!
    • The Bogan
      braided lines for the turbos

      By The Bogan · Posted

      Would something like this be an option  https://processhose.com/products/configurable-metal-hoses/1-2-in-t316-stainless-steel-annular-corrugated-configurable-flexible-metal-hose-assembly-with-ends-t304-single-braid-masterflex-af5550.html I'm looking at this for replacing the OEM EGR when installing a aftermarket intake plenum 
    • r32-25t
      Unpeeling the Orange

      By r32-25t · Posted

      The once piece tail shafts with cv type joints on either end are the ones that end up vibrating and the vibration is caused by the cv joint binding as it turns, I’ve also seen them explode from the binding 
    • Kinkstaah
      braided lines for the turbos

      By Kinkstaah · Posted

      Take this with a pinch of salt, it's from someone (me) who got annoyed with turbos entirely. I hated aftermarket lines. If I had the option to use hardlines with whatever turbo I had - I would use them, 10/10, 100% of the time. The only reason people go larger, heat resistent, shielded lines etc is because they have to. And yes they don't last forever. Even if you spend big bucks on all the best heat shielding money can buy, with the best heat resistant, fuel resistant, oil resistant, radiation resistant hose, they get stiff and break down and just don't last the way a metal pipe will.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Unfortunately I am quite literally halfway across the globe. So all sources for parts like that are far away for me. What do you mean by that exactly?
×
×
  • Create New...