Jump to content
SAU Community

Recommended Posts

Well I bit the bullet and this Kakimoto cat back arrived last night! Unfortunately the quick install saw a snapped stud last night.... typical - two bolts to install and one broke!

will fit it today when I get a chance and post some pics and feedback

The quality is awesome, and im sure its alot lighter than the massive factory item!

Ben.

post-4475-1271192362_thumb.jpg

I would be interested in hearing if anyone else is getting a dump pipe and front pipe made up to fit an aftermarket exhaust. So there is a possibility Westside has a flange to fit?

I think i have westsides flange. i did most of the footwork to get em off the ground there. i had about 10 lazer cut in the beginning after buying the hack job of a flange from liverpool exhaust.

get together and get westside to make a bunch more, i wouldnt mind my one now haha

Well I bit the bullet and this Kakimoto cat back arrived last night! Unfortunately the quick install saw a snapped stud last night.... typical - two bolts to install and one broke!

will fit it today when I get a chance and post some pics and feedback

The quality is awesome, and im sure its alot lighter than the massive factory item!

Ben.

post-4475-1271192362_thumb.jpg

Mmmm... Kakimoto N1 Hyper Mega.

Very pretty indeed. Can't beat JDM aftermarket gear for quality, particularly for exhausts :D

Out of curiosity, who did you get it in through and how long ff it take?

will be interested to hear you comments on how you find the exhaust inside the car as that is a pretty small middle muffler.

But it does look nice.

Should be around the 95dB mark at the tip if I recall correctly.

Will sound awesome though.

Youtube vid please! :)

Edited by iamhe77

Well bolted it up today after grinding a stud off and punching it through the original front pipe... why is nothing simple when it comes to cars?

But it was well worth it! the kakimoto isnt too loud, but has a great low down grumble at idle, and screams very nicely up top!

Its definitely louder than a Legalis, but i would like to think the kakimoto flows a lot better - there is a noticeable increase in power, which surprised me quite a bit. I didnt expect to see much improvement until dump/front and cat were done. It seems to pull a bit more down low, and alot more up top than the standard exhaust.

I got my brother to do some drive-by runs on quiet country road, and it sounds great from outside :)

Ill get some pics of it installed over the next day or so - I dont have a video camera - so not sure if i can record any sound :D

It sits a little low doesn't it? You will have to be careful with that.

And that's why I decided not to get a Kaki because it sits a bit too low for my liking, especially when my car is 2.5" lower. But if the height wasn't an issue, I would've bought one of these exhausts as I've used Kaki on my other cars.

For flow wise, it will beat the Fujitsubo no doubt as it doesnt have a mid muffler.

well the test was the driveway to my unit. I would scrape pretty heavily with the old exhaust, and while the kakimoto still touches, its not as bad as the stock. same goes with the local supermarket carpark, all the bumps there would slightly scrape and now it clears it!

I think it sits lower at the tip and inline with the rear axle (but because there are wheels there it wont scrape there very often...)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...