Jump to content
SAU Community

Recommended Posts

Just wondered what times the quickest Stageas in oz/nz/japan were running .

Does anyone have any confirmed run times

does anyone know what the standard quarter mile is for a standard series 1 and 2??

sorry chucking another question in your post

I ran an 11.7 also in mine.

<this one. 500rwhp. There is a youtube of it running a 12.2 somewhere but wasnt running high boost. The car is in WA now so I hope the new owner (yes you Zane) takes it to the track in the middle of winter. My run was on a shit Darwin track at around 30deg.

  • 3 weeks later...
11.3 at 124.8mph mine did with 560rwhp and full weight (1740kg + driver) with 235/17 street tyres, Engine had made over 600hp previous but had spark issues so only ran on 18psi boost setting.

It will be featured in HPI magazine very very soon (next 2-3 months)

very nice !!!have any pic's?

thanks guys, the photoshoot for the mag was done ages ago so it has 33 gtr rims in the mag, maybe one pic of the LM's on it, the car now runs a totally different setup and that engine and box is in a 32 gtr. Should be interesting with the weight saving on what its capable of.

heres the actual pics of the drag run... (the other car ran a 10.6 and check out the KMH speed difference, i caught him in the top end, though he was auto and had a killer launch)

DSC_0573resize.jpg

DSC_0574resize.jpg

DSC_0575resize.jpg

DSC_0576resize.jpg

DSC_0577resize.jpg

DSC_0578resize.jpg

DSC_0580resize.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...