Jump to content
SAU Community

Recommended Posts

Hey guys,

Seeing as we have a 1/4 mile thread thought i'd chuck this up as its more of a real world performance benchmark and i'm intrigued as to what the quicker stags are getting down to

Its nice and easy if you've got an ecutalk or a boost controller that does 0-100's

use a format like this:

Model:

Mods:

Power:

->0-100 Time:

So mine is:

Model: S2 RS4S

Mods: Turbo back exhaust, constant high boost mode

Power: 137 awkw (from prev owner, was running 7psi but is now running 10)

->0-100 Time: 5.65 as read from the ecutalk (with a quite a bit of clutch slip)

Cheers, Tom

Link to comment
https://www.sau.com.au/forums/topic/315900-stagea-0-100-times/
Share on other sites

So mine is:

Model: S2 RS4S

Mods: Turbo back exhaust, constant high boost mode

Power: 137 awkw (from prev owner, was running 7psi but is now running 10)

->0-100 Time: 5.65 as read from the ecutalk (with a quite a bit of clutch slip)

Cheers, Tom

O-100 in 5.65 - I should check your reading

Edited by RSVFOURUK

yeah my speedo does read a tiny bit under, but probably still a sub 6 sec time

did also launch from about 5k rpm

lets see some more times, most boost controllers have these kind of functions if set up correctly

Bear in mind RSFOURUK that most of the world uses km/hr not miles/hour. But it still looks a bit quick to me.

Yes sorry about that

The 260RS was supposed to do 0-60mph (100kmph is 62,5mph) in 6 seconds so 5.65 would be a fair bit quicker.

Yes sorry about that

The 260RS was supposed to do 0-60mph (100kmph is 62,5mph) in 6 seconds so 5.65 would be a fair bit quicker.

Another thing to keep in mind is that Stagea speedos read high... usually by 7-10% :(

Not sure how the factory measure their 0-100kph times, but a 0-110 speedo reading time would give a more accurate 0-100 real world time... if that makes sense :)

blazt tells me mine does 6.3 on a good slip launch from 4 grand . cat back front mount 0.65 bar . half a tank and my 100+ kg

are you going into third or limiting 2nd? could cut my time if i let it hit the limiter in 2nd

There's a program I've got on my iPhone that measures acceleration, braking, g-forces (on a skidpan or during acceleration/braking) and approximate power outputs.

It's called Dynolicious, here's a link...

I haven't had a chance to use it yet because I like owning a car and having a licence and dont' want to risk either of those by "practicing" on the road, so maybe at the next track day or skid pan day I'll try them out.

The gtech bangers are quite good, used to sell them and trial used one, was pretty close to the money on a friends tt 300zx we are talking about 5 years ago and have no idea what model, from memory they were about 400bucks to buy

Or just use the stop watch on your phone.

if you've got a digital camera that takes video you can use that, there are bits of software about that let you go through frame by frame and you can work out the exact point when you hit 100

let see some times ppl

mine was like 3.?? (cant remember exact number, but was measured with gtech) when i did it years ago with the old motor setup, it did a 11.1 @128mph on the gtech on same run (street tyres on the street with stock gtr manual box). 560hp at wheels, and pretty modified (too much to list)

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...