Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm interested to see what people consider to be a reasonable power band; IE full boost ---> Redline, for a street car.

at the moment i make fullboost at 5.2k or a touch later and pull all the way to redline (8k), this is in a built 32 GT-R with 33 N1 turbos.

Although I already knew this was rather laggy, It was driven home to me when i was given the opportunity to drive a mates 32 with GT-SS's, the response was phenomenal.

As many of you may have seen, I have been deciding which way to go with turbo's at the moment, wanting to keep the twins configuration and the standard manifold as mine has been cleaned up i have a few options available to me.

I have decided I would not want to go smaller then the output of a pair of -5's, but it seems my knowledge of what's available is lacking, as I detect a bit of a gap in the range between -5's and -10's or GT-RS's.

Sorry for the long and convoluted wind up but my main points are this:

What is an acceptable power band for a street driven track car ?

Is there a turbo that is above the -5 and below the GT-RS/-10 ?

Would -10's/GT-RS's be too laggy or surge in my application ?

I've gotten in trouble for not posting enough detail before so the car is:

2.7L or nigh on, not a stroker.

33 N1 turbos

Built engine

light headwork

portmatched inlet manifold

trust 4" intercooler

264" Inlet and 272" Exhaust camshafts both with 10mm lift (HKS)

4" Exhaust.

Cheers,

Mitch.

Edited by Nee-san
Link to comment
https://www.sau.com.au/forums/topic/317551-acceptable-powerband/
Share on other sites

GT-RS is 450rwkw+

So much more than R33 N1's will ever make. -5's will do 380-400rwkw on a good motor, GT-SS's around 330.

There are no turbos "in the middle" of any of those far as i am aware.

Yeah, i thought it a little strange that nothing sort of falls into that gap...

anyway, what do you think about useable powerband ? the power of the GT-RS's is rather appealing but if im only reving it to around 8500 RPM will i have enough room to use it ?

The -5's really do look quite good its just that in the dyno thread ive seen a fair few setups fall short of the 420+KW im looking for.

If it helps, the car will be spending probably 80% of its track life at Queensland raceway.....

Thanks for the reply mate,

Mitch.

One thing I can say.....R32 and R33 N1 turbos are about the worst thing on the market for response. Any modern, ball bearing turbo will make the same power 1500rpm sooner....or far more power at the same revs if you go larger

One thing I can say.....R32 and R33 N1 turbos are about the worst thing on the market for response. Any modern, ball bearing turbo will make the same power 1500rpm sooner....or far more power at the same revs if you go larger

Agreed, this is why im tossing up really, since as Ash has pointed out there is really no middle ground, GT-RS's or -5's for around queensland raceway it all comes down to which one....

I'm just not sure of the Pros or Cons each way as i havent personally worked with either of these turbos.

Cheers,

Mitch.

a car that makes 380 on song by say 4000 revs should be faster around a track and more fun that a car that makes 420 by 5000 revs

personally i would be looking at possibly dropping your power level a tad and shooting for some response.

you could also go a twinscroll single setup...

There are a few that go around QR on here with power between 370rwkw & 440rwkw...

Hopefully one of them can pass a bit more experienced comment :ermm:

Given you can get 400rwkw from -5's on a solid motor... it's only 20rwkw shy of what you "want" which is pretty close IMO

One thing I can say.....R32 and R33 N1 turbos are about the worst thing on the market for response. Any modern, ball bearing turbo will make the same power 1500rpm sooner....or far more power at the same revs if you go larger

Thank you for this post Duncan, i just saved myself from spending $1200 on R33 N1s

GT-SS would be the way to go if i was to upgrade when the stockers let go.

Also, how would you tell if the turbos came from a R32/R33/R34 ?

What middle ground are you looking for?

As ash said, one option is about 330kw, the next finishes around 400kw, the next goes up around 450kw.

It's not like garrett will make bolt on turbos that suit 330kw, then a new set for 350kw, then a new set for 370kw, then a new set for 390kw, then a new set for 410kw etc

it may be worth going to QR when you know skylines will be there and just asking people in the pits :ermm:

I think -5's or -9's. Its torque and response out of the corners that make for a quick track car. Its the reason why the EVO's still kick many the GTR ass at track days. Lighter weight cars, plus also more respnse out of the corners.

If your racing a fast track though and are achiving 250Km/h+ on the straights then GTRS's and more power is worth considering so you can make up some time on the straights and sacrifice some out of the corner response (and stability).

Its been my limited experience that most of the time less powerful cars are easier to drive smoother around a track, and as a result produce lower lap times.

T517z's are good for 360rwkw @ 20psi on my car... usable power from 4000 - 8500... there's your middle ground;)

dunno if you've got E85 up there but -5's with some E85 should get you over 400rwkw... heaps of power for track work IMO

Ive been in your car, before you owned it.

What a machine that thing is!

OP: As said, its up to you to find the amount of lag you're happy to put up with in the conditions you drive it in. Mine is between 3500/4000 and 8500rpm for HKS GTRS's although a 3L bottom end, that suits me, may not suit others. It would be a good idea to look through the dyno result threads in this section aswel, some decent info in there (aswel as a lot of crap results)

i wonder what would happen if given a laggy powerband you change diff gears instead

does it make the car complete ass to drive or does it reasonablly shift it lower, ie more response

the evo specs reference 4.3 and 4.5 final drive vs GTR/GTST 4.11

i wonder what would happen if given a laggy powerband you change diff gears instead

does it make the car complete ass to drive or does it reasonablly shift it lower, ie more response

the evo specs reference 4.3 and 4.5 final drive vs GTR/GTST 4.11

There's someone on this board, who i doubt will see this thread, but has recently taken out a 6 speed box and put the stock 5 speed back in.

The car was pretty responsive (given its huge single turbo) and now is just all lag.

Ive been in your car, before you owned it.

What a machine that thing is!

OP: As said, its up to you to find the amount of lag you're happy to put up with in the conditions you drive it in. Mine is between 3500/4000 and 8500rpm for HKS GTRS's although a 3L bottom end, that suits me, may not suit others. It would be a good idea to look through the dyno result threads in this section aswel, some decent info in there (aswel as a lot of crap results)

I can't imagine what another 100rwkw with the same (if not better) response would be like... but if I'm ever in NSW I'm coming round to find out! lol

I'm keen to try E85 next... figure as far as bang for buck at this point nothing can beat it

edit: yeah Paul the Mines 34GTR runs shorter diff ratios... I'm keen to try the GTS4 diffs, they are about 4.3 from memory... can't hurt the cruising speed that much, I hardly ever use 5th gear as with the big cams it runs more efficiently cruising at 3,500 - 4,000 rpm... you can hear its actually quieter at that rpm too which took some getting used to, looking down and seeing 4k on the tacho makes you want to shift up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...