Jump to content
SAU Community

At Transmission Oil For V35 Coupe?

ja5on350
 Share

Recommended Posts

ja5on350 Apprentice

ja5on350

Posted
Posted

Hi Guys,

I did a search for Transmission oil in this forum and I couldnt find anything to confirm for a 2003 V35 Coupe AT, is it the same transmission oil as the 350Z? J-Matic?

I'm approaching 70k's, and my mechanic told me the oil should get changed when it starts to go very dark, which mine is..

Has anyone ever done a change on an AT? how much oil do you need and how much did it cost?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/317660-at-transmission-oil-for-v35-coupe/
Share on other sites
180 wanabe Proficient

180 wanabe

Posted
Posted

Had my trans oil changed by nissan when I hit 65k mind you they only used one bottel so im guessing they only drained the pan, a full flush should use 2 bottles and yeah only use Nissan J matic

  • 3 months later...
interfooler Rising Star

interfooler

Posted
Posted

Nissan quote me $260 to change my 6mt transmission oil. For a full flush it's $460. I was thinking if I should just buy the oil from Nissan and take it somewhere else to do it if that's cheaper. Can workshops do a full flush?

iamhe77 Grand Master

iamhe77

Posted
Posted
Hi Guys,

I did a search for Transmission oil in this forum and I couldnt find anything to confirm for a 2003 V35 Coupe AT, is it the same transmission oil as the 350Z? J-Matic?

I'm approaching 70k's, and my mechanic told me the oil should get changed when it starts to go very dark, which mine is..

Has anyone ever done a change on an AT? how much oil do you need and how much did it cost?

Cheers.

Yep, Matic J or Nulon 100% synthetic transmission fluid (I have used this for the past 60,000kms - no worries)

Matic D or Dextron III will destroy your clutch packs faster than you can accelerate to 100kms.

Nissan quote me $260 to change my 6mt transmission oil. For a full flush it's $460. I was thinking if I should just buy the oil from Nissan and take it somewhere else to do it if that's cheaper. Can workshops do a full flush?

Take it to another Nissan Dealership.

Nissan Ferntree Gully in Vic do a full flush on their machine with Matic J (this includes the transfer case for my car - AWD) for $275. You should also ask for their additive pack to be used in the flush (all new Nissan have this added prior to sale).

interfooler Rising Star

interfooler

Posted
Posted
Take it to another Nissan Dealership.

Nissan Ferntree Gully in Vic do a full flush on their machine with Matic J (this includes the transfer case for my car - AWD) for $275. You should also ask for their additive pack to be used in the flush (all new Nissan have this added prior to sale).

Thanks for the tip I will give them a ring!

iamhe77 Grand Master

iamhe77

Posted
Posted
I wouldnt be putting Nissan J-matic into a 6MT transmission :D

haha, indeed!

I was merely quoting what they charged me for the Matic-J flush + additive satchel.

One would think that a manual box flush would be about the same price or possibly less due to the gear oil required.

  • 11 months later...
  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...