Jump to content
SAU Community

Recommended Posts

Hi guys, for a while ive been planning the next stage of mods for my R, after reading the forums for peoples advice and experiences, I think i have an idea of what i want. Just after some clarification or criticisms so i can make a start on purchases.

oh, jst quick, my car is rarely driven and never has or will be taken to the track/drags; after anything over 300awkw with more low to mid range power/reduced lag

Intake: Will change from my apexi pods back to the stock airbox; i have an apexi panel filter and a nismo snorkel.

AFM: Would my stockers handle this power level or would a nismo upgrade be worthwhile?

Turbine: Seems that 2860-9 would be the go as they are off the shelf and bolt-on.

Water/Oil lines: Thinking of braided lines for the turbos as the solid OEM lines possibly can move and rupture (found this out on my s15)

Intercooler: Keeping the stocker but ill have it cleaned out of oils/deposits for the best efficiency

Dump Pipes: As ive read many times, the stockers will be fine; might have the internals grinded of jagged edges

Front Pipe: Have a stock pipe on ATM, worthwhile for an upgrade?

Injectors: Will stock provide enough flow - perhaps a fuel pressure regulator to boost the pressure?

Fuel Pump: Maybe a drop-in nismo upgrade - is this required?

Cam Gears: Not sure about which brand; maybe HKS, tomei etc

Ceramic Coating: Turbine exhaust housing; worthwhile?

My current mods produce 255awkw: have a power fc, HKS EVC, Fujisubo cat-back, high-flow cat and apexi pods. Creatd motorsports tuned the car and ive been very happy so ill stick with them.

I know this is a bit of a long thread and alot of information ive searched for previously but im just after a quick final review by anyone who cares to chime in - would be much appreciated

Thankyou in advance

-Johnny

PS: here she is now sporting some new nismo skirts and rear pods - im also grabbing a Z-tune bonnet (finally)

post-4266-1271849397_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/317689-r34-gtr-stage-2-upgrades/
Share on other sites

Johnny

go the -9's

Use factory lines (best solution and bulletproof)

std dumps, make sure all heat sheilds are reused and no need to ceramic coat.

port match exh manifold to turbo mounting flange.

nismo afms (nicer resolution)

std pump

Upgrade Front pipe for sure

Injectors 555, 660 (std can be done for just over 300 but will be too close to max duty for my liking)

Cam Gears (see access autoworks)

killer setup 315-335kw easy (common outcome)

Johnny

go the -9's

Use factory lines (best solution and bulletproof)

std dumps, make sure all heat sheilds are reused and no need to ceramic coat.

port match exh manifold to turbo mounting flange.

nismo afms (nicer resolution)

std pump

Upgrade Front pipe for sure

Injectors 555, 660 (std can be done for just over 300 but will be too close to max duty for my liking)

Cam Gears (see access autoworks)

killer setup 315-335kw easy (common outcome)

Great advice man, thankyou so much! ill start ordering parts.

Any particular brand of injectors and front pipe?

Answers are already given, but, you need to read this comment;

Your GTR, looks tough as all hell!!!!!!!!!!!!

A nice set of wheels and thats it :)

:D im glad to hear that man, didnt want to go overboard with cosmetics lolz but i will grab some volk lm-gt4's in black to fill the guards a bit better. Thanks man!

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

i bet it stands out at the bundy shops haha :D

lmao!!!! only ever at the CBA ATM or nandos

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

Hmmm well not really, ill have to check that program out; maybe a change in final drive would be worth looking in2. I never go into 6th gear, except when im on a freeway.

Thanks for the tip

lolz wouldnt want to be able to say: i go from 0-150 in 6 seconds. Now at 9000rpm im out of gears

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

Hmm might sound a bit daft but ill jump on my xbox later; forza motorspot 3 lmao!!!!!

hopefully snowman will post in his experience

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

He also changed the gearbox to the 5-speed so forget about that.

The R34 diff gears suit the getrag as the ratio's are different.

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

Do you have a link to this sim please?

http://www.paulr33.com/downloads/simr.rar

unrar and run simr.exe

no need to install

load pit, BNR34 stock

then change the tune to L (low tune i think)

then do a stock 1/4 mile and see how you go

then change the diff gears as you like

you can even copy the gear ratios from BCNR33 (write them down on paper) and edit them into BNR34 ratios

result is BNR34 with 5 speed ratios

only problem is there is no dyno feature, so all you can do is 1/4 mile at flat knacker

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...