Jump to content
SAU Community

Recommended Posts

Hi guys, for a while ive been planning the next stage of mods for my R, after reading the forums for peoples advice and experiences, I think i have an idea of what i want. Just after some clarification or criticisms so i can make a start on purchases.

oh, jst quick, my car is rarely driven and never has or will be taken to the track/drags; after anything over 300awkw with more low to mid range power/reduced lag

Intake: Will change from my apexi pods back to the stock airbox; i have an apexi panel filter and a nismo snorkel.

AFM: Would my stockers handle this power level or would a nismo upgrade be worthwhile?

Turbine: Seems that 2860-9 would be the go as they are off the shelf and bolt-on.

Water/Oil lines: Thinking of braided lines for the turbos as the solid OEM lines possibly can move and rupture (found this out on my s15)

Intercooler: Keeping the stocker but ill have it cleaned out of oils/deposits for the best efficiency

Dump Pipes: As ive read many times, the stockers will be fine; might have the internals grinded of jagged edges

Front Pipe: Have a stock pipe on ATM, worthwhile for an upgrade?

Injectors: Will stock provide enough flow - perhaps a fuel pressure regulator to boost the pressure?

Fuel Pump: Maybe a drop-in nismo upgrade - is this required?

Cam Gears: Not sure about which brand; maybe HKS, tomei etc

Ceramic Coating: Turbine exhaust housing; worthwhile?

My current mods produce 255awkw: have a power fc, HKS EVC, Fujisubo cat-back, high-flow cat and apexi pods. Creatd motorsports tuned the car and ive been very happy so ill stick with them.

I know this is a bit of a long thread and alot of information ive searched for previously but im just after a quick final review by anyone who cares to chime in - would be much appreciated

Thankyou in advance

-Johnny

PS: here she is now sporting some new nismo skirts and rear pods - im also grabbing a Z-tune bonnet (finally)

post-4266-1271849397_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/317689-r34-gtr-stage-2-upgrades/
Share on other sites

Johnny

go the -9's

Use factory lines (best solution and bulletproof)

std dumps, make sure all heat sheilds are reused and no need to ceramic coat.

port match exh manifold to turbo mounting flange.

nismo afms (nicer resolution)

std pump

Upgrade Front pipe for sure

Injectors 555, 660 (std can be done for just over 300 but will be too close to max duty for my liking)

Cam Gears (see access autoworks)

killer setup 315-335kw easy (common outcome)

Johnny

go the -9's

Use factory lines (best solution and bulletproof)

std dumps, make sure all heat sheilds are reused and no need to ceramic coat.

port match exh manifold to turbo mounting flange.

nismo afms (nicer resolution)

std pump

Upgrade Front pipe for sure

Injectors 555, 660 (std can be done for just over 300 but will be too close to max duty for my liking)

Cam Gears (see access autoworks)

killer setup 315-335kw easy (common outcome)

Great advice man, thankyou so much! ill start ordering parts.

Any particular brand of injectors and front pipe?

Answers are already given, but, you need to read this comment;

Your GTR, looks tough as all hell!!!!!!!!!!!!

A nice set of wheels and thats it :)

:D im glad to hear that man, didnt want to go overboard with cosmetics lolz but i will grab some volk lm-gt4's in black to fill the guards a bit better. Thanks man!

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

i bet it stands out at the bundy shops haha :D

lmao!!!! only ever at the CBA ATM or nandos

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

Hmmm well not really, ill have to check that program out; maybe a change in final drive would be worth looking in2. I never go into 6th gear, except when im on a freeway.

Thanks for the tip

lolz wouldnt want to be able to say: i go from 0-150 in 6 seconds. Now at 9000rpm im out of gears

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

Hmm might sound a bit daft but ill jump on my xbox later; forza motorspot 3 lmao!!!!!

hopefully snowman will post in his experience

it might be working look into, could be a cheap mod

i know snowman did it to his 34R to get more acceleration vs top speed

but not sure how it affects 5th @ 100km/h for example, it might make it rev too much and likewise may do the same for 6th gear @ 100km/h

He also changed the gearbox to the 5-speed so forget about that.

The R34 diff gears suit the getrag as the ratio's are different.

do you care about top speed?

download real car simulator, load up BNR34 stock specs with L tune and run on 1/4

then change the final ratio from 3.7 to 4.11 and see how it adjusts the car's acceleration

Do you have a link to this sim please?

http://www.paulr33.com/downloads/simr.rar

unrar and run simr.exe

no need to install

load pit, BNR34 stock

then change the tune to L (low tune i think)

then do a stock 1/4 mile and see how you go

then change the diff gears as you like

you can even copy the gear ratios from BCNR33 (write them down on paper) and edit them into BNR34 ratios

result is BNR34 with 5 speed ratios

only problem is there is no dyno feature, so all you can do is 1/4 mile at flat knacker

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...