Jump to content
SAU Community

Shipping To Port Kembla

mini2
 Share

Recommended Posts

mini2 Community Regular

mini2

Posted
Posted

Anyone knows of some good towies that do regular runs from the 'gong to Sydney? The towie I used to use no longer tow cars but only heavy machinery.

Or...does Kiwicar still do what they used to do ie sends the car to Brisvegas and they'll help out with trucking it down to Sydney? Port Kembla is just a major PITA when it's used to be nice and easy at Glebe Island.

Thanks fellas.

Link to comment
https://www.sau.com.au/forums/topic/317963-shipping-to-port-kembla/
Share on other sites
Iron Chef Grand Master

Iron Chef

Posted
Posted

Ring Kirrawee Towing and ask for Stratty 9521 2300. Yes Port Kembla is a right pain, and towing seems to cost a fortune. I actually send most of my cars through Brisbane - it's cheaper to transport them from there through Kiwi than to get them towed from Port Kembla. Go figure...

GTR-N1 Grand Master

GTR-N1

Posted
Posted
i should invest in a car trailer and do port kembla --> syd runs for extra cash :D i live bout 5mins away from port kembla car port.

^^^this strategy (via trailer hire) would certainly reduce the cost of a double-run by a professional driver.

Beer Baron Grand Master

Beer Baron

Posted
Posted
if you add up all your costs and also your time, it would work out cheaper to get a professional tow... :)

yep precisely! it's actually not that bad. tow should be around $250 for a 'retail' customer from port kembla wharf to sydney cbd and a bit less if you are in the trade or have a good relationship with your chosen towie. for the hassle of paying $120 for a trailer for a day, plus needing a car to tow it with (another $80+ if you don't have one), then add the drive down, the drive back home, then the drives to pick-up and return the trailer, all the fuel you use and the half a day minimum this will all take and all of a sudden $250 for it to be delivered to your door or workshop of choice seems pretty bloody reasonable.

most towies with a proper tilt tray wont get out of bed for less than $150 anyway so $250 for such a distance seems pretty fair.

iron chef, I would always advise shipping to the port the car is going to. kiwi are bar stewards. for all the extra time and extra risk to the car I say ship direct to sydney and try a towie like select. if you explain you are a broker and can provide regular business they should do you a reasonable price. much more convenient I reckon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...