Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

what is the difference between these three pipe sizes?

much power to gain from 3" to 4"?

sound?

steel type?

Bout an 1" to an 1" 1/2 Lol.. sorry bro

I have a 4" HKS on mine, 330rwkw no restriction should make a heap more soon to.

as a rough guide

3" ~ 300kw

3.5"~350kw

4"~400kw+

Sort of real rough guide do a search bro i think R31Nismoid has gone over it in a few threads.

Cheers,

Mitch.

Bout an 1" to an 1" 1/2 Lol.. sorry bro

I have a 4" HKS on mine, 330rwkw no restriction should make a heap more soon to.

as a rough guide

3" ~ 300kw

3.5"~350kw

4"~400kw+

Sort of real rough guide do a search bro i think R31Nismoid has gone over it in a few threads.

Cheers,

Mitch.

Yep, that's pretty much what R31Nismoid will say.

455rwkw, 75/80mm exhaust.

It's got nothing left to give, replacement being made right now.

Sounds decent though, but that's mainly the cams

Link Doesnt work ?

Works now , sounds tough !

Edited by Nee-san
455rwkw, 75/80mm exhaust.

It's got nothing left to give, replacement being made right now.

Sounds decent though, but that's mainly the cams

Be interesting to see what happens when you change it without even a retune :P

not too many too list. the car is completely standard. :thumbsup:

i dont want too many mods. in the future i might go to N1 tubos with all the supporting mods, but at the moment i just want exhaust.

Stock? And here we are thinking it's got a whole catalogue thrown at it.

Leave the stock dumps until you change turbos.

For now, get some good quality front pipes (I have hks, they're good), a high flowing cat (or none, up to you), and a kakimoto catback. It will sound SO good and be enough flow for now, or for later when you change to steel wheel turbos.

You may have people saying to get a 3.5" catback but I don't see why, when the front pipes merge to a 3" merge and your car is stock.

Steve. Did you ever get a unigroup tune before the 3 litre? we have *almost* the same setup apart from the the extra 260 cc. it would be interesting to see the results.

Yeah actually, he spent 45 mins with the microtech the night before driving it to Victoria due to a faulty ecu another forum member sold me.

Yavuz wasn't happy with the tune but he said it's enough power for a weekend of fun but super safe so nothing will happen. On 98, 371rwkw 18psi. No mechanical changes the next tune was 403rwkw, maxed injectors changed to ID2000's and then tuned as is. Wait until my new exhaust is done, I'll be straight back to Yavuz for another tune with more boost etc

Edit; sorry, that was 3L. No one in Sydney ever tuned it while it was 2.6L, I misread your question, sorry. Also it's an 87mm bore, so a tad more than 260cc, but who cares it's splitting hair. Sorted out your pipes?

Stock? And here we are thinking it's got a whole catalogue thrown at it.

Leave the stock dumps until you change turbos.

For now, get some good quality front pipes (I have hks, they're good), a high flowing cat (or none, up to you), and a kakimoto catback. It will sound SO good and be enough flow for now, or for later when you change to steel wheel turbos.

You may have people saying to get a 3.5" catback but I don't see why, when the front pipes merge to a 3" merge and your car is stock.

haha, yes same, i was expecting a longer list of mods :thumbsup:

Pretty much as you said Steve.

Although i would just get 3.5" from the outset personally. Once day you might decide to get slightly bigger turbos etc and a tad larger exhaust could offer benefits.

Certainly no need for a 4" unless you are planning on a 400rwkw+ sorta build.

Also some merge's actually go to 3.5", i know the trust ones do... so certainly not all front pipes end up 3" @ the merge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...