Jump to content
SAU Community

Recommended Posts

Was constantly worrying about my car's exhaust getting EPA-ed since i am always moving in and out of the city pretty often, and truely recieved one just a couple of days ago. :D

I don't wanna keep worrying about getting EPA-ed nor do i have the time to waste going around to clear the EPA.

I am seeking help or recommendation for an aftermarket exhaust system which would pass EPA, and something that i can stick on my car for good. And preferably also a workshop that i can get it fixed. Am located in North Melb.

Am not really worried about performance, would like a nice tone that will clear EPA without having to swap out to the stockie. So any recommendations will be much appreciated :P

Link to comment
https://www.sau.com.au/forums/topic/319524-recommend-exhaust-for-r34-gtt/
Share on other sites

This has been covered MANY times. I had an R34GTT and ran a Fujitsubo Legalis system. It was great for power and passes EPA also - I know as I had it done. I was running 3" from the turbo back too and still passed :D

http://www.nengun.com/fujitsubo/legalis-r

Looked nice enough too -

2471023_2.jpg

I'm sure there are local systems around though. Others will comment.

adzmax.

thanx i saw your recommendation on that in previous threads, but that was a couple of years ago.

am unsure if new systems are out :D

anyway thanks, have a few questions regarding that and will direct it into your mailbox.

Fujitsubo 3" turbo back is what I got n what most r34s come over here with from what I've seen. They r nce n mild and will pass EPA unless ur unlucky like me n get tested in an underground carpark lol but yeh definatly get that

Wow, I like your car, very clean and well styled. +1

This has been covered MANY times. I had an R34GTT and ran a Fujitsubo Legalis system. It was great for power and passes EPA also - I know as I had it done. I was running 3" from the turbo back too and still passed :P

http://www.nengun.com/fujitsubo/legalis-r

Looked nice enough too -

2471023_2.jpg

I'm sure there are local systems around though. Others will comment.

Trust PE2, very quiet on idle and cruising (and thats 3" turbo back)

Very nice note when flooring it. Looks good as well.

.

would it still be quiet at 4800 rpm?

thats what rev we need to be at and measured for EPA

most people would recommend a pe2 for its quiet yet nice bark on load, but i would definetely recommend somehting bigger and less restrictive for a 300kw+ setup if thats wat ur looking for.

if you a size 8 shoe, you buy a 9 to let yourself grow into them. same rule applies for modified cars.......for me at least.

Hi Jap Muscle~

I don't have a 300kw+ setup, mine is stock :thumbsup: Not looking to readily modify the car as of yet, due to time restriction.

other than a 3" turbo back piping with a 5" cannon at the end. I failed the noise emission because when backing off the accelerator it echos off the 5". so right now, something nice and would meet legal requirements would be splendid for me :thumbsup:

anyway UPDATES for the thread,

have gave themufflerman a ring, and set a date to go down on wednesday... will be back to this thread for updates :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...