Jump to content
SAU Community

Recommended Posts

Hi there all, New to the site. I currently have a problem with my Series 1 gtst with a series 2 Rb25DET. It runs fine when cold but when it gets warmer it tends to feel as if its restricting somewhere.

Ive checked the CAS, Injectors, Computer, Spark plugs.

Im really stuck on this problem the only thing i have not done of the above is replace the Crank angle sensor( Altho it looks phyisically fine) which ill be giving a shot on monday, If anyone is able to lend a hand it would be very much appreaciated. Thanks jamie.

Link to comment
https://www.sau.com.au/forums/topic/319733-r33-gtst-problem/
Share on other sites

Hi there all, New to the site. I currently have a problem with my Series 1 gtst with a series 2 Rb25DET. It runs fine when cold but when it gets warmer it tends to feel as if its restricting somewhere.

Ive checked the CAS, Injectors, Computer, Spark plugs.

Im really stuck on this problem the only thing i have not done of the above is replace the Crank angle sensor( Altho it looks physically fine) which ill be giving a shot on monday, If anyone is able to lend a hand it would be very much appreciated. Thanks jamie.

alright well first no one can really help much as that could be from anything,

what has been done to the car, ie aftermarket parts, have you done a tune up at all in the past while like spark plugs , fuel filter ect ect.

we need more info and how long has it been happening for.

tell us everything !! :cool:

What do u mean by restricting?

When does it feel like its restricting? (Revs/speed/boost)

Umm maybe your coilpacks but yeah I dunno jut give as much info as possible and someone on here should be able to sort it out :cool:

What sort of spark plugs does it have/did u replace them with?

does it splutter and stall? or just feel like it's asthmatic? . a few things for you to change imo would be the water temp sensor to the ecu , then the air sensor thingy on the exhaust that i can't remember the name of :cool: , clean the afm out with co cleaner , check fuel pressure (actually, do that first ) , change fuel filter . ;)

Thanks for the replys guys, Ive also had the coilpacks checked and apprently are fine which is leading me to the CAS, It Defiently increases the problem when i run higher boost, The revs drop but not to stalling point normally sits about 1000rpm, Random drops to 500 on idle. Im thinking the CAS is internally damaged..

Aftermarket parts are the following:

3" Turboback Trust exhaust.

Turbo smart boost controller.

Power FC.

Garret GT30 turbo.

Bigger injectors.

Front mount intercooler.

Spitfire coilpacks.

Nismo Diff.

The restricting defiently feels like fuel/spark. Altho ive been told by the dyno results what is happening is my injectors are all switching off for like a milisecond, So im thinking earth/wiring problem Or Crank angle sensor =/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...