Jump to content
SAU Community

Any One Bought From Negun.com

gtr_scottie

By gtr_scottie,
in New South Wales

 Share

Recommended Posts

gtr_scottie Community Regular

gtr_scottie

Posted
Posted

Hi guys i am wondering how many people have bought of www.negun.com or www.rhdjapan.com as i am very cautious about buying from overseas. I need to get injectors 700cc don't overally care what brand, tomei type b pon cams or equivalent and spit fire coil packs to finish my set up off. Any feed back would be greatly appreciated.

cheers scottie

Link to comment
https://www.sau.com.au/forums/topic/320275-any-one-bought-from-neguncom/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

lol Ash is posessing Steve-o!

Anyway....

Yes people buy from them every day

Every week or 2 someone starts a thread about them taking too long. expect 4-6 weeks like they say

They are cheap

Expect little to no warranty or support - so make sure you order the right thing, or the price won't look so cheap.

If you want the right thing, today, support a local business :thumbsup:

Jetwreck Grand Master

Jetwreck

Posted
Posted

I've used rhdjapan a couple of times....1-2 weeks wait though.....depending on the availability of the product.....just harass them if you don't see it being shipped within 3 day's

UWISSH! Grand Master

UWISSH!

Posted
Posted

nengun is shit, slowest delivery ever

i now use rhdjapan, they are soo much better. prices are usually the same as nengun or cheaper and delivery is much faster.

You shouldnt have any dramas with them as the parts you listed are usually alsways in stock

central coast person Proficient

central coast person

Posted
Posted

i work as a spare parts interp and definatly would recoment RHDjapan knowing this is where parts come fastest from. Nengun is good but what ever you order you will not see it for a month + !!!!

vspecIInur Experienced

vspecIInur

Posted
Posted

ditto on that, i ordered cams, cam gears, valve springs, timing belt (for evo) and i waited 2 months. I was getting worried as I took a big risk with the amount of money i spent overseas. Greenline are good, RHD japan is good too. The only two I usally deal with now

zebra Grand Master

zebra

Posted
Posted

I just buy locally now and generally locally made products where I can.

I works out cheaper half the time and if anything goes wrong I dont have to try and get in touch with people in japan and pay freight to and from japan to have it repaired.

EG my Greddy E-01 Boost controller needs to go back to be repaired, but I doubt i will worry about it and just buy an E-boost street

s2d4 Rising Star

s2d4

Posted
Posted (edited)

Well, my only experience with Nengun didn't end well.

I had ordered a Trust oil cooler/relocation kit and after two months, his excuse was Trust has gone bust and is no longer in operation and proceeded to refund the money in yen without even asking for my opinions on the matter. During this time, the currency rate had changed by 12% so it was pretty much like playing with stocks, only I had neither parts or money with me and making a lost of 180 dollars.

So yes, that guy at Nengun can be seriously shady.

Edited by s2d4
Duncan Grand Master

Duncan

Posted
Posted
i like to support local business to but sometime money dosent allow me to or i cant justify spending $400 more to buy local for injectors for example

thats all cool, and I often buy stuff I can wait for os as well when I'm in no rush. Just understand that if you order the wrong injectors you will be paying twice! And any mistake will take ages to sort out if yuo have to send stuff back.

Well, my only experience with Nengun didn't end well.

I had ordered a Trust oil cooler/relocation kit and after two months, his excuse was Trust has gone bust and is no longer in operation and proceeded to refund the money in yen without even asking for my opinions on the matter. During this time, the currency rate had changed by 12% so it was pretty much like playing with stocks, only I had neither parts or money with me and making a lost of 180 dollars.

So yes, that guy at Nengun can be seriously shady.

Don't see what they have done wrong there? You paid in yen, you got refunded in yen. Would you be calling them shady if they exchange rate went up in between? Or are you saying it was Nengun's fault that Trust went broke ;)

gtr_scottie Community Regular

gtr_scottie

Posted
  • Author
Posted

Yeah i am thinking about just buying my injectors s/h in aus and i will service them myself as far as everything else is concerned now i think i will just keep a eye on the forums because i cant start the work for 2 months since for work commitments thanks for the info now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...