Jump to content
SAU Community

Recommended Posts

I was looking at having my R32 Nismo turbos rebuilt as i was having boost issues and have come across a hurdle.

One of the shafts was damaged and turbo specialist only discovered it when he was balancing.

What he has suggested as these need replacing is to go for a gt25 setup using my existing .60 compressor housing and either the .64 exhaust or a .48 exhaust housing of a standard gtr turbo. The benefits of this is it will be the same price as rebuilding the nismo turbos but instead of the 270 thrust bearing I will have a 360 thrust bearing.

What would you recommend in terms of the exhaust housing? I was making 261rwkw on 12.2 pounds with the nismo turbos. what would I expect with the different housings, Response vs top end will the .48s struggle up higher revs or should they be fine for a relatively standard engine.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/
Share on other sites

Not really worth rebuilding as Duncan said, so if you could answer the below there might be some better options :P

Do you have a built motor mate?

What are the overall goals and budget?

Hey there, the motor has been rebuilt in Japan however am unsure of exact rebuild specs.

Power goal at this stage is around 300rw/awkw at this stage I just need turbos to return car to road

The turbo person I am dealing with said using these newer cores (t25 or something) they are very similar to the gt28 series but are also rebuildable

I have looked into the ball bearing turbos pricewise it is two thirds the cost of these for the t25 setup and at the moment my budget is really stretched and won't allow the ball bearings :)

Edited by R32GTS4NZ
Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5239146
Share on other sites

if your power goals are higher than what you are running now, then i would not go down in exhaust housing size. you'll only limit the maximum power you can make

I understand this, however according to the turbo builder he tells me with .48 housings I should see full boost around 4000rpm and that he knows of a car making 500hp with these style turbos.

What I would like to know is this realistic, will having the .48 rears reach full boost at 4000rpm and be good for 300kw

From what I have read it seems that no matter what the n1s are laggy however with the smaller housings will they turn out ok?

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5242074
Share on other sites

I understand this, however according to the turbo builder he tells me with .48 housings I should see full boost around 4000rpm and that he knows of a car making 500hp with these style turbos.

What I would like to know is this realistic, will having the .48 rears reach full boost at 4000rpm and be good for 300kw

From what I have read it seems that no matter what the n1s are laggy however with the smaller housings will they turn out ok?

Thats an issue, he didnt say these exact turbos, so he could be talking about any bolt on GTR turbo making 500hp

not the ones he will make for you

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5242173
Share on other sites

I understand this, however according to the turbo builder he tells me with .48 housings I should see full boost around 4000rpm and that he knows of a car making 500hp with these style turbos.

What I would like to know is this realistic, will having the .48 rears reach full boost at 4000rpm and be good for 300kw

From what I have read it seems that no matter what the n1s are laggy however with the smaller housings will they turn out ok?

Mate i make 12psi @ 3300pm, and then 1bar somewhere soon after that.

This is with GT-SS's and they will make a LEGIT 500hp - not a "guess" with that "style".

And they are NOT using .48 housings, they are infact LARGER.

So basically...

Larger housing, better response

Something is wrong with the turbos you are buying if its not getting it's giddy up until 4000rpm with such tiny housings.

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5242527
Share on other sites

Mate i make 12psi @ 3300pm, and then 1bar somewhere soon after that.

This is with GT-SS's and they will make a LEGIT 500hp - not a "guess" with that "style".

And they are NOT using .48 housings, they are infact LARGER.

So basically...

Larger housing, better response

Something is wrong with the turbos you are buying if its not getting it's giddy up until 4000rpm with such tiny housings.

Ok thanks for that, I have been thinking it may be just worth getting stock turbos until funds allow further OR I have just been offered the garrett ball bearing ones at cost price from a different source. He suggested 7s or 9s and so if the cost is right i may go for them as they will be similar price to the rebuild and ball bearing!

I understand there isn't a huge difference between the two so will do some more research into them. Any pointers will be appreciated :blush:

Currently stock ecu but definately looking at uopgrading

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5242998
Share on other sites

They will be the same price if not cheaper than a rebuild + ball bearing simply because there is no labour involved.

Given -9s are around what, 1200-1350ea depending, i see little point in any other option :blush:

Also never put factory turbos back on, just too risky IMO.

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5243010
Share on other sites

They will be the same price if not cheaper than a rebuild + ball bearing simply because there is no labour involved.

Given -9s are around what, 1200-1350ea depending, i see little point in any other option :D

Also never put factory turbos back on, just too risky IMO.

Rebuild was about $1200 each with the new cores machining etc.

Initially I got priced $1610 each for the gt2860s but now someone is pricing up for me tomorrow morning and said they can do cost price :D

I understand and would prefer to go straight for the ball bearings however there are some other people influenicing my decision and watching my wallet sadly

Prices are NZD so are a little more expensive but hopefully turns out well.

What ones would you reccomend for street? I love the feel of the kick when boost comes on, will these provide a nice feeling when I put my foot down?

:blush:

Link to comment
https://www.sau.com.au/forums/topic/321011-turbo-help/#findComment-5243072
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...