Jump to content
SAU Community

Recommended Posts

You can try and fit a valve body from the states and fill it with nissan fluid, It may last a bit longer and can be done with the box in the car, otherwise you will need to replace the clutch packs also, which means a full remove and rebuild. You are looking at around $3500 for that but I warn you, dont get them to high stall the converter or the trans ecu will have issues with locking it up. (as it ramps the voltage to the lockup clutch too slowly)

Kewish Automotive did mine, they have worked on similar boxes before but mine was their first M35 RE5. Shifts instantly and firmly at heavy throttle and softly at light throttle although there is still ecu lag when shifting.

Thanks for the reply. We just tried putting the nissan fluid in the box. No luck there it still slips.

Looks like rebuild time. So leave the stall converter stock is your advice.

I think i will limp it around for a few weeks

I looking into a rebuild about 1 year ago. I was going to use Dominello's in Sydney.

If you are planning on building the motor up and wanting to run a standalone ECU can I suggest you looking into a Manual Valve Body as well. That way you should be able to have complete control of the gearbox without input from the motor ECU.

No keeping it simple just rebuild upgrade the clutch packs. Not planning on rebuilding engine.

I just want to tune it any news on SAS reflash?

Ive got a supra that im forever throwing money at. I dont need another

I just want to tune it any news on SAS reflash?

lol.....wish I had a dollar for every time i've been asked that question.....I can tell you it's getting closer.....but then again so is xmas!

I ring every week....Tom know my voice and my fake ones now....lol.

I can only chase.....personally.....if it doesn't happen VERY F#$KING soon I think I will need to cut and run!!!!!!....I'm sick of having lag till 4,500rpm and a 6,000rpm rev limit because of misfires!

this is the only other real option!!!!!!

http://www.importmonster.com.au/view?url=h...20CON%20V%20Pro

Edited by Jetwreck
lol.....wish I had a dollar for every time i've been asked that question.....I can tell you it's getting closer.....but then again so is xmas!

I ring every week....Tom know my voice and my fake ones now....lol.

I can only chase.....personally.....if it doesn't happen VERY F#$KING soon I think I will need to cut and run!!!!!!....I'm sick of having lag till 4,500rpm and a 6,000rpm rev limit because of misfires!

this is the only other real option!!!!!!

http://www.importmonster.com.au/view?url=h...20CON%20V%20Pro

It might be i was looking at going down that road soon, but it looks as if it is the transmission first

lol.....wish I had a dollar for every time i've been asked that question.....I can tell you it's getting closer.....but then again so is xmas!

I ring every week....Tom know my voice and my fake ones now....lol.

I can only chase.....personally.....if it doesn't happen VERY F#$KING soon I think I will need to cut and run!!!!!!....I'm sick of having lag till 4,500rpm and a 6,000rpm rev limit because of misfires!

this is the only other real option!!!!!!

http://www.importmonster.com.au/view?url=h...20CON%20V%20Pro

I got a little bit of mapping stuff if you go down the fcon route and cant find someone to map it for you :) or want someone different to do it.

Anyone dealt with wholesale automatic transmissions in melbourne .

The tranny is a RE5R05A is it compatable with the RE5R05A's out of the other nissans. ie patrol, navara ect

Will a change over unit bolt straight on

Yeh i just spoke to wholesale auto transmissions they said it is a rare transmission and they dont have any rebuilt stock. Lol wish full thinking.

I found a second hand one for $1250 That will get me out of trouble for a few months and give me time to rebuild my one

Transmission let go today anyone know anybody with one.

My mechanic said it will take 3 weeks to rebuild.

Ouch. Mine took a month.

You could get on to the wreckers that bought the white M35, they might sell you a box cheap for 5k :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PayPal is a safe, online payment system that enables businesses and individuals to safely send and receive money, making it an indispensable tool in both personal and professional contexts. However, many users wonder how to send money on PayPal? Don't be alarmed if PayPal is new to you - all the steps can be found by visiting merchant sites with links marked "Pay or send money". Once clicked, select payment method, amount, and add message or note for recipient(s). Upon successful transaction completion you will receive an email containing details of transaction. Let’s start by understanding how PayPal works, how money transfers from banks to PayPal and using various payment methods. Moreover, to transfer money between PayPal and bank, head to the Wallet section and click "Add Account", selecting either "Transfer within seconds with debit" or "Transfer between 3-5 days with bank", and following any instructions shown on screen until completed successfully.   How to Send Money Over PayPal: The Basics Before sending money through PayPal, first create an account. Here is how to set-up a PayPal account: ·         Click “Sign Up” on either the PayPal website or app to enter your basic information such as email address or name into their system. ·         Link your bank account, debit card or credit card directly with PayPal so you can fund transactions directly using these accounts. ·         Verifying your PayPal account will enable you to send and receive more funds. Typically, PayPal requires that you verify your credit card or bank account by making small deposits into it. ·         Once your PayPal account has been established, you can send money through it.   How Do I Send Money to Someone on PayPal? After creating a PayPal account, you can easily send money through it. Here is how to send money to someone on PayPal: ·         First of all log into your PayPal account ·         Once on your dashboard, click on "Send & Request Tab." ·         After this enter the recipient's email or mobile phone number. ·         Enter the amount you wish to send to someone. ·         At last, recheck all the details and click "Send Payment" to complete your transaction if everything looks in order.   How Can I Send Money PayPal for Goods and Services? PayPal provides a safe method for individuals and businesses alike to transfer funds online, both personally and commercially. When paying for goods or services there are additional protections in place both for buyers and sellers. PayPal Buyer Protection offers you peace of mind when paying for products or services with PayPal. In the unlikely event that there is an issue with a transaction, if there are any discrepancies you may dispute it and be eligible for a possible refund. You need to follow the same steps to send money, but select Paying for Services or Goods when prompted. In fact, this extra layer of protection will keep your account safe from fraudulent attacks.   How to Transfer Money to PayPal from Bank? Here is how to transfer money from PayPal from bank: ·         Log into PayPal using either its app or website. ·         Click "Add Funds" in the Wallet section, and add money directly from your bank to your PayPal account. ·         If you have linked your bank account with PayPal, select it under Funding options to select it as your funding option. ·         Enter the amount you would like to transfer to PayPal from your bank balance. ·         Click Add Funds. It typically takes several days for funds to arrive on your PayPal account.   FAQ How can I send money PayPal? Log into your PayPal account, select "Send and Request," enter in your recipient's phone number or email address, select the amount due, payment method of choice and click on "Send Now" - quickly and safely sending money via PayPal is now an efficient method of money transfers!   How do I transfer money to PayPal from a bank? Log into PayPal and select "Add Funds" to transfer money from your bank to PayPal. Select your account number, input an amount, and confirm it. Though the transfer may take up to several days for completion.   How do you send money to someone on PayPal? Simply log into your PayPal account, select "Send and Request", enter the recipient's phone number or email address, select the amount to send, and click "Send Now".   How can I receive payment through PayPal? Senders can easily accept payments with PayPal by providing your PayPal email address and being notified via email when a payment has been completed. When funds appear in your PayPal account, they will appear instantly!
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...