Jump to content
SAU Community

Recommended Posts

my gtst at the begining of april 09 since then ive been doing stff to it

When i got it it had splitfire coil packs a uprated gasket exhaust and down pipe and a profec b 2

this is how it was

29032009042.jpg

29032009035.jpg

29032009037.jpg

29032009039.jpg

so ive fitted a ally rad fmc and oilcooler with push fit pipes and a intercoolerand clipped and replaced most of the hoses in the engine bay

liner9.jpg

liner11.jpg

liner10.jpg

the intercooler mad the usual flat spot so i purchased a pfc and datalogit remapped it andsorted out .The oil cooler made a massive difference as the oil temp would be 105 degrees when being pushed no its max is 90 degrees so thums up to that

ive fitted a carbon splitter i made to the spec2 bumper as i dont like the aftermarket bumpers

liner6.jpg

liner5.jpg

the 18inch repo bbs rims

23052009253.jpg

23052009251.jpg

got a spare engine which had lost compression so i stripped it to see what it was

3 pistons were shot but the bores were ok so sent everything off to get machined with new pistons and rods acl bearings ect and just got it all back

Photo027.jpg

Photo024.jpg

Photo028.jpg

block

P1010027.jpg

P1010026.jpg

painted up

P1010029.jpg

P1010028.jpg

Link to comment
https://www.sau.com.au/forums/topic/322253-my-skyline-from-the-uk/
Share on other sites

head with valves all in

P1010032.jpg

P1010030.jpg

lifters in

P1010033.jpg

P1010034.jpg

cams in

P1010035.jpg

P1010037.jpg

also a the car is also my daily so we have been putting the cage in as and when we have time so here it is

P1010044.jpg

P1010045.jpg

P1010046.jpg

P1010041.jpg

P1010040.jpg

nest will be the door bars and tags and seat bars but just waiting for these to turn up

.::Welcome to CORBEAU.com

then ill make my carbon bonnet and really cant make my mind up wether to make some doors or just buy them

Some latest pics

MEMO0009.jpg

MEMO0008.jpg

MEMO0006.jpg

MEMO0006.jpg

i made these

MEMO0007.jpg

MEMO0010.jpg

MEMO0012.jpg

MEMO0002.jpg

MEMO0001.jpg

what do you think

head with valves all in

P1010032.jpg

P1010030.jpg

lifters in

P1010033.jpg

P1010034.jpg

cams in

P1010035.jpg

P1010037.jpg

also a the car is also my daily so we have been putting the cage in as and when we have time so here it is

P1010044.jpg

P1010045.jpg

P1010046.jpg

P1010041.jpg

P1010040.jpg

nest will be the door bars and tags and seat bars but just waiting for these to turn up

.::Welcome to CORBEAU.com

then ill make my carbon bonnet and really cant make my mind up wether to make some doors or just buy them

Some latest pics

MEMO0009.jpg

MEMO0008.jpg

MEMO0006.jpg

MEMO0006.jpg

i made these

MEMO0007.jpg

MEMO0010.jpg

MEMO0012.jpg

MEMO0002.jpg

MEMO0001.jpg

what do you think

beautiful

obviously looking to do some track work. what other plans for it, engine suspension brakes etc.

love the door trims..

ive just purchased a link g4 and a gt3071r my spare engine i have tomi pon b cams, suspension at the moment its cusco coil overs but for track there very under damped so i use a company called gaz do they are building me at set of coilovers that be weighted to the car and sprung correctly ! the car is built to fia standards which is basicly the British clubman race regulations but at the moment its just track use . I do all my own carbon work i have just made a bonnet to no pics as yet tho but i can do carbon infusion and wet lay so i have some fun with that

i feel a bit of a coward though as ive dropped the compression to 8.5.1 i here you boys run high with big horse power . Australia are alot more forward than us in tuning thats one of the reasons i went for the link and ditched the power fc plus i like mapping pressure verse rpm rather than maf verse rpm

Hi Jason, great work,

Car`s come on well,

I grow up suffolk/ norfolk , lowestoft ,& the Market weston just out of Diss 16 mile`s from Sennertton,lucky you have few TRACK`s around you to give the SKLINE a workout,

Roy Have Famliy in Cambridge,use to go out on MONDAY night`s with Few Race Driver`s lol,oldday`s mid 80`s

Jason look`s like few SKYLINES getting in to UK now,

Best of luck with your TRACK DAY`S & hope you give then something to think about ,

cheer`s Chuckie.

cheers Charlie ! there are loads of skylines in the uk now ! we use snetterton for testing and race there 5 to 6 times a year

Hi Jason,

Sweet suit SKYLINE with long back straight :D ,

& you musy love BOMB HOLE :P:P ,Loved it there great TEST TRACK LOTUS used to TEST MANY MANY YEAR`S Ago,

+ VAN D`s we would pop over road & spend day ENGINE testing,

I do miss going there, as WE have a GOCART track here as are MAIN Track :D ,

But I LOVED to head up to CADWELL just an wonderful mix & GREAT FUN OVER MOUNTAIN :D:D ,

But there`s Lot`s of top spot`s just depend`s what your LOOKING for,

So BEST OF LUCK WITH SKYLINE ENJOY ,

Cheer`s Chuckie.

Hi Jason,

Sweet suit SKYLINE with long back straight :D ,

& you musy love BOMB HOLE :D:P ,Loved it there great TEST TRACK LOTUS used to TEST MANY MANY YEAR`S Ago,

+ VAN D`s we would pop over road & spend day ENGINE testing,

I do miss going there, as WE have a GOCART track here as are MAIN Track :D ,

But I LOVED to head up to CADWELL just an wonderful mix & GREAT FUN OVER MOUNTAIN :):) ,

But there`s Lot`s of top spot`s just depend`s what your LOOKING for,

So BEST OF LUCK WITH SKYLINE ENJOY ,

Cheer`s Chuckie.

my favourite track is brands hatch indy circuit bloody good drive lol you sound like you miss the uk charlie

Hi Jason ONLY thing i MISS IS MOTOR SPORT THERE BOTH BIKE`S & CAR`S ,

Was BIKE MAN BEFORE & YES MISS THAT,

BUT DON`T MISS SHIT WEATHER :yes: ,

Having work with both ,

Edited by chuckie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...