Jump to content
SAU Community

Recommended Posts

Hey guys

still deciding between -5s or -9s

There arent many results for -9s in the dyno thread so if you have them could you provide details on what kind of power you are making with them as well as any key modifications (besides all the standard crap) that you think helped you to get to your power figure.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/322850-garrett-gt2860-9s/
Share on other sites

I remember disco saying that out of all the turbos garrett make for hks the -9 has no modification by hks so therefore the -9 is exactly the same as the gtss minus the actuators.

Hks however use their actuators on it, so the higher tension on the spring will cause boost to come on a little earlier and might not settle at the same level as the garrett actuators.

U can also use your stock actuators on the -9 but again i haven't seen anyone who has tried it to see when and how boost comes in.....something i myself would love to see results for,with this being the determining factor of "which turbo is better" with the choice of actuator used.....something i think can be tweaked non the less using a good ebc

+1 for Don Data and NIGTR.

Also remember the -9s don't come with actuators, and you really don't want to be using 20yo actuators on your new turbos. So, you could put HKS actuators on the then you're 100% equivalent to GT-SS. IMO You should decide between -9s or -5s based on your power goal, and go for the smallest turbo that meets that goal.

Does anyone know the price of new HKS actuators to suit?

It's crap that the -9s are the most expensive compared to the -7,-5,etc...

I have heard that -1s are the same as -9s but they include actuators. Is this true and anyone know about pricing?

Edited by HecticGTR
I remember disco saying that out of all the turbos garrett make for hks the -9 has no modification by hks so therefore the -9 is exactly the same as the gtss minus the actuators.

<cut>

Really? I'm pretty sure I read that the compressor wheel or something on the HKS GTSS is slightly different to the Garrett, but otherwise they are identical.

From reading the power graphs I've noticed the HKS GTSS is usually slightly close to the 330rwkw :happy:

Oh, please post up in the RB26 sticky so the info doesn't get lost.

I'm looking into the Hypergear highflow with 2860RS cores, it looks interesting but not sure if anyone besides the 300ZX guys have tried it...

my goal is 320awkw... from reading the dyno thread it seems as though the GT-SS are def capable however not everyone is reaching that number...

A profec B should solve all the actuator problems right...

anyone know when the SS hit full boost (with cam gears)... 3.5k?

lol ok... where did you pick yours up from Sean?

Boostin imports, but I'm sure you can get a good deal at CGC too. Basically any Garrett dealer, but shop around! :happy:

I might be using stock actuators, but may go the reinforced HKS style one's.

My R32 had R33N1's, then HKS2530's, so now I chose the -9's for the 34 to have the feeling of the N1's with almost the oomph of the 2530's for the street.

Really? I'm pretty sure I read that the compressor wheel or something on the HKS GTSS is slightly different to the Garrett, but otherwise they are identical.

From reading the power graphs I've noticed the HKS GTSS is usually slightly close to the 330rwkw :)

Disco would have been talking about the -7s with that comment. The wheels on the -9 are the same as GT-SS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...