Jump to content
SAU Community

Recommended Posts

Hey guys

still deciding between -5s or -9s

There arent many results for -9s in the dyno thread so if you have them could you provide details on what kind of power you are making with them as well as any key modifications (besides all the standard crap) that you think helped you to get to your power figure.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/322850-garrett-gt2860-9s/
Share on other sites

I remember disco saying that out of all the turbos garrett make for hks the -9 has no modification by hks so therefore the -9 is exactly the same as the gtss minus the actuators.

Hks however use their actuators on it, so the higher tension on the spring will cause boost to come on a little earlier and might not settle at the same level as the garrett actuators.

U can also use your stock actuators on the -9 but again i haven't seen anyone who has tried it to see when and how boost comes in.....something i myself would love to see results for,with this being the determining factor of "which turbo is better" with the choice of actuator used.....something i think can be tweaked non the less using a good ebc

+1 for Don Data and NIGTR.

Also remember the -9s don't come with actuators, and you really don't want to be using 20yo actuators on your new turbos. So, you could put HKS actuators on the then you're 100% equivalent to GT-SS. IMO You should decide between -9s or -5s based on your power goal, and go for the smallest turbo that meets that goal.

Does anyone know the price of new HKS actuators to suit?

It's crap that the -9s are the most expensive compared to the -7,-5,etc...

I have heard that -1s are the same as -9s but they include actuators. Is this true and anyone know about pricing?

Edited by HecticGTR
I remember disco saying that out of all the turbos garrett make for hks the -9 has no modification by hks so therefore the -9 is exactly the same as the gtss minus the actuators.

<cut>

Really? I'm pretty sure I read that the compressor wheel or something on the HKS GTSS is slightly different to the Garrett, but otherwise they are identical.

From reading the power graphs I've noticed the HKS GTSS is usually slightly close to the 330rwkw :happy:

Oh, please post up in the RB26 sticky so the info doesn't get lost.

I'm looking into the Hypergear highflow with 2860RS cores, it looks interesting but not sure if anyone besides the 300ZX guys have tried it...

my goal is 320awkw... from reading the dyno thread it seems as though the GT-SS are def capable however not everyone is reaching that number...

A profec B should solve all the actuator problems right...

anyone know when the SS hit full boost (with cam gears)... 3.5k?

lol ok... where did you pick yours up from Sean?

Boostin imports, but I'm sure you can get a good deal at CGC too. Basically any Garrett dealer, but shop around! :happy:

I might be using stock actuators, but may go the reinforced HKS style one's.

My R32 had R33N1's, then HKS2530's, so now I chose the -9's for the 34 to have the feeling of the N1's with almost the oomph of the 2530's for the street.

Really? I'm pretty sure I read that the compressor wheel or something on the HKS GTSS is slightly different to the Garrett, but otherwise they are identical.

From reading the power graphs I've noticed the HKS GTSS is usually slightly close to the 330rwkw :)

Disco would have been talking about the -7s with that comment. The wheels on the -9 are the same as GT-SS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've searched fairly extensively among Japanese websites but found nothing really like those skirts in your photo. The closest I got was Origin Labo side skirts however they look more 'complete' in that they have a finishing piece or tab at the rear of the skirt so it blends into the bodywork, unlike the one in your pic. For that reason I'd say the skirts in your pic could be adapted from another car and they didn't include that tab piece, or those skirts aren't copied from an existing skirt but an original design. Sorry I can't help out in regard to ID'ing/sourcing them
    • Wonder if JB Weld sponsored the event lol
    • There's a big difference between a car built with millions of dollars in R&D, and someone like yourself taking a normal sporty road car, and making it 5 times more powerful. At the same time, get a modern sports car, and you can turn them up towards the 1000hp mark a lot easier too. Also, give that Lambo another 20 odd runs, and chances are it too may break something.
    • There isn’t really a cheap upgrade here. If someone made a decent, bolt in 6 speed that holds some grunt, it would do very well. The 5 speeds suck. You can put a - OSG 5 speed gear set into it. Ratios are tall so it zaps the “zing” out of it. Had one, busted it. - PPG 5 speed gear set synchro or dog’s. Ratios are even taller. - An overpriced Getrag. Nice to drive, expensive to source now. - A sequential of some sort. Expensive, very expensive. How many times do you pop a 5 speed before you throw the toys out of the cot?  
    • Yes, fair call. I don't have any special love for super/hyper cars but it was impressive to watch the Lambo line up against successive skylines without any problem at all. 
×
×
  • Create New...