Jump to content
SAU Community

Recommended Posts

yeah made up.. because the engine is in a american spec nissan z33 350z, i can get some big dumps made for it... and it will be pretty cheap here, about the same price as importing a set.

what you think ?

your setup sounds like fun - maybe run the oem airbox & see how the sound changes? i'd also say its the pods that are making the noise...

ive also wondered whether i should upgrade my hks split dump pipes to the bellmouth type / 3 inch dumps if im aiming for 350awkw with a 2.6ltr & -5s? any thoughts?

i am only running 16psi of boost atm... its summer here and even at 2am its 40deg c....

also i am running stock r32 gtr dump pipes because the hks dumps i had on the 2510 did not fit for some reason.

how much power would these stock r32 gtr dump pipes be robbing from my setup? i was thinking of getting some replacements or get some bad ass 3" ones made, what would be better?? or is it not needed? come winter i really do want around 340rwkw

-9 on an RB30..its very responsive like a NA.

Sounds like a pretty lethal setup. Add e85 to the mix and you should

be well above 340rwkw in the winter. Some people have hit around 370rwkw on e85

on a standard 26 with -9s. Power figure yet to be backed up with 1/4 run though.

Ditch the 32 dumps for some 34 dumps. 55mm outlet compared to a 59mm outlet

on 33 dumps but you can see the inlet of the 34 dumps promote flow that is more laminar.

That and its quite a bit bigger in the middle as well.

Keen to see how this turns out for you

we dont have e85 here, but our 98 is good, real good... 330 - 340kw on 98 will do me just fine.

i am going to get a set of r34 dumps i think.

I'm using HPI dumps with my -9s and making 350kw on 98

So when winter hits in sure you can get there aslong as the rest of the exhaust is up for it

front pipes measure 61mm & collector is 88mm - is there an advantage to running larger diameter dump pipes if my front pipes are this size?

my current hks split dump pipes are 59mm

What size are your front pipes, Marko?

thats what she said hey Paul :)

makes me wonder how much of a restriction my rb30dett was when i had it - that also ran hks split dumps with only a 3.2" inch system & slightly smaller front pipes.

what size front pipes u running big boy?

Jesus, they're tiny!!!

I'd say not, unless you're gonna change front pipes too.

far out that r they straight pipes then (no cat)?

I thought u said 3.5" was your old cat back exhaust

Two mufflers, no cats, twin tips... Almost looks standard...

May have, but I've had this system on for close to two years.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
×
×
  • Create New...