Jump to content
SAU Community

Recommended Posts

McDud,

it seems you have once again consumed the Bong Water!

Be sure that you were mistaken with the TV Show on Discovery Channel was in fact "Future Weapons"

I won't back up the other hacks,

But be sure Scotty (I run solo Stephens) and Brad and I will be handing out some *Chop Chop to Team Green Wang Fail

Eat a Dick

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

It's ok big boy...

May as well vent your frustration now..

Better then out on track, as the only chopping that you'll be doing will be the grass you collect when spinning out...

Looking forward to Team Green Wang Pump taking the trophey this time :P

You clowns will end up in the pits with a worn clutch or chain issue.

Shit, you could share a Coke and a Kit Kat with Bart in the Pits, you might even get lucky and hit the showers early together

Fag!

You clowns will end up in the pits with a worn clutch or chain issue.

Shit, you could share a Coke and a Kit Kat with Bart in the Pits, you might even get lucky and hit the showers early together

Fag!

a mid race shower sounds like a great idea... i would estimate that buy around 19-20min in to the race the jolly green wang pump team will have built a solid enough lead to pit for a shower break... if the lead isn't solid enough we will just use the pump on it!

i can't foresee us wearing a clutch 3 times in a row... the only thing being worn will be our pimp hands on your cheak, when we slap you for not earning your keep... "now back to yo corna biatch... bring me sum paper"

  • 2 weeks later...
Looks like I am in need of a new co-driver.

Paul has been whipped into shape by Lauren and pussied out for a flower smelling festival or something such pansy like.

P.S. when do we pay for this shindig?

PM heading out tonight for payment

PC is faggetery personified!!!!! :thumbsup:

Team Green Wang Pump...i just got off the phone from Kart track. They are fitting your kart with pneumatic jacks to make it easier to get it off the ground....they are also running 4 extra pit crew for your Kart.....also restocked plenty of Clutches for you. :)

Gents,

Incorrect BSB and Acc N# sent out.

Please drop the last digit from the BSB (1) and add it to the beginning of the Acc number.

Well picked up Tom

Cheers

MG

Sorry lads, I'm going to have to pull out, I'm crook as a dog and not really keen on putting around like a sweaty pig acting as a moving chicane... Tifosi racing therefore announce their immediate and regretful withdrawal..

Mike, may you be spared a couple of young, determined woglings nipping at your heels haha... Till next time then? :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...