Jump to content
SAU Community

Missfire Boost@4500-5500 RPM - The Answer! (for me at least!)


Recommended Posts

hey ben, i have noticed that you have mentioned a 10rwkw gain on your car from just the spitfires, its a bit hard for me to believe, so could you please explain the circumstances

ie. if there was a dyno run directly before and after u fitted them on the same dyno or whatever..??

(i just expect my car to run properly again when i put mine in!)

Hey mate, relax with the CAPS :)

i taped plastic pieces between the coils and the frame as a last resort, this lessened the misfiring, but as the car got hotter it was pretty much the same as before, and oh yeah, the plastic started melting  :rofl:  

that was my last resort, so yesterday i just ordered a set of spitfires. ($$)

Sorry it didn't work out for you, it does get hot in there.... so far my plastic hasn't melted at all, but the amalgamated tape has deteriorated a bit, but still covering the coils pretty much. Thecar has done 500kms since in various temps, and so far good, no misfire at all.

I think that the method described in this thread is an excellent fix for the relative cost (<$1), but at the end of the day, splitfires are the go.

Do you mind me asking what you paid for your coils?

Or if anybody reads this, where is the cheapest? for new blue splitfires?

The best i've found is $900.

all i got to say is CHAMPION i have spent almost a year trying to track down this interrmittent miss bought a set of coils from SSS and spent hours changing one at a time trying to find the one that was stuffed Got home last night spent half hour taping all 6 coils and then went for a test run and beautiful no more miss also this morning sweet as to work so Thanks for helping with my ongoing headache

Sorry it didn't work out for you, it does get hot in there.... so far my plastic hasn't melted at all, but the amalgamated tape has deteriorated a bit, but still covering the coils pretty much. Thecar has done 500kms since in various temps, and so far good, no misfire at all.

I think that the method described in this thread is an excellent fix for the relative cost (<$1), but at the end of the day, splitfires are the go.

Do you mind me asking what you paid for your coils?

Or if anybody reads this, where is the cheapest? for new blue splitfires?

The best i've found is $900.

Hey,

i paid 635 delivered from sau trader newkon.biz..

but i believe he has updated the thread with info that he has no more stock, so i guess you could ask him when he is getting more, he gets them from japan direct not from the aus distributor, which is why they are cheap.

the cheapest i have seen locally is around 900 as well.

i have had the spitfires in for a week now, they work fine, back to full power and maybe a little more :P

Its good to see your fix is still holding up! i guess mine had gone too far already, and it was not one, but three of them that were stuffed!

having a very similar problem, tried tape, lessened the problem but not fixed..... Ordered coils from nengun, they were $560 (delivered to queensland) on special. (they arent a great deal more off special) very good service from these guys........

just a thought, something that might be a more perminate fix could be glued heat shrink

tho im not sure were you would get it from and how long it would last.

i am going to try and get some from work and ill let you know how it goes.

by the way thanks for the tip with the tape... so far so good. *touches wood*

just a thought, something that might be a more perminate fix could be glued heat shrink

tho im not sure were you would get it from and how long it would last.

i am going to try and get some from work and ill let you know how it goes.

by the way thanks for the tip with the tape... so far so good. *touches wood*

Here is a more permanant fix:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=51046

I did this over 9 months ago and haven't had to touch them again....

If you do it properly it is a permanent fix....

Alternatively you can do like i have and that is fit 6 Bosch coils (MEC717)and run leads

Changing plugs is a piece of cake now. and you can use the standard ignitor

This is working on a Series 1 RB25 so external ignitor not sure about series 2 with the built in ignitor

What did that cost if you don't mind me asking....

I was exploring this alternative ages ago, but found it expensive at the time, so I was going to go for the splitfire replacements.... before I gued them...

Anyhow, if it is a cheaper alternative to splitfires, then it may be the go for many others...

Complete price for 6 coils and leads was $300.00 as to labour cost my mate is a Auto Electrician so it did not cost me anything for fitting and wiring

But as a Example a Workshop wanted $600. to supply and fit a set of VN commodore coils.

Apparently a guy over in NZ has found a Buick V6 coil pack that works fine, and for $150 I am about to find out if it is or not, just about to order one.

http://forums.skylinesdownunder.co.nz/show...&threadid=39596

Hi guys

I have had this prob for some time as well . just went into jaycars and bought "starbrite liquid electrical tape " it says its got a service range of -30 degrees to +255

let u know what happens

Hi Guys,

I just taped up my coils with electrical PVC tape and that seems to have cleared most of the misfiring ie, runs pretty decently.

However, I notice that when I'm crusing in 4th gear and then decide to give it some, the engines sometimes cuts off and then all of sudden goes good. If I were to slow down and then accelerate immediately after this happens, it doesnt cut off anymore.. Could be that I have missed a coil?

Any help would be great... and lastly please let us know how that liquid electrical thing goes..

thanks

steve

seems to work ok you have to rally coat after coat to build it up in the "danger" areas along the sides. I dont think its the answer. this week im going to fit a set of vs-vr coils .anyone using the vn ones (they are square as apposed to the vs-vr ones that are round) should realise most holden guys swap to the later ones cos the early ones are so much trouble

we will have to see how it goes. the coils are around $150 from the wrekers.

and if you are aseries two you need an igniter (the little heatsinked aluminium box that sits at the back of the rocker cover) as im series one its easier just pull the wiring that usually goes to the coils join them in three lots of twon ( the right ones that is) and a few connecters

if it works well its got to be the best answeras the coils are out in the airflow then. and if you are worried they wont perform as well you can always spend 3x $108 for motec ones for holden 3.8's at autobarn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...