Jump to content
SAU Community

Recommended Posts

A mate went to town on my car with a bunch of Final Inspection products, a clay bar, a buffer, a lot of masking tape and a toothbrush! Here are the results... sorry about the garage but it was raining and dark by the time we finished... well by the time he finished... I cleaned a wheel at some point... I think

really impressed by the wheel cleaning product (very tricky to clean around the bolts on 2 piece rims) they are now cleaner than I've ever seen... also the sealer he used at the end is makes for a ridiculously smooth finish, has to be touched to be appreciated

polished the headlight plastic as well, they look brand new... you know someone is keen about detailing a car when he pops out your indicators and windscreen washer jets!

overall a pretty good result for stock 14 year old paint

feel free to comment so that I can reply and have an excuse to waste time at work :)

gallery_7369_282_114597.jpg

gallery_7369_282_321108.jpg

gallery_7369_282_309321.jpg

gallery_7369_282_205569.jpg

gallery_7369_282_53637.jpg

bit of photoshop love

gallery_7369_282_29109.jpg

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

That looks amazing.

Can you get your mate to post a full list of products he used and perhaps a bit of a run-down on process?

I'm not 100% on exactly what he used but it was all Final Inspection stuff... the wheel cleaner is a must if you have tricky to clean wheels... he hit them with the cleaner (left it sit for 10 min) and a paintbrush then just hosed it off... I wish I had taken a pic of how dirty they were before

http://www.finalinspection.com.au/store/pr...rf511nmhgbd3e21

he used an orbital buffer as well and was saying that the pads you use are really important... but not sure exactly which ones

I'll see if he has time to jump in here and give a quick run down of products and process

I did give him some cash to cover his costs but it would have cost more had a taken it to a handwash/polish place

some more photoshop love, this is my new desktop:)

gallery_7369_282_30226.jpg

Looks good Nick! Cleanest it's been since Auto Salon I bet! :blink:

yeah Nathan kept the paint in really good condition... Daz couldn't believe how straight it was for a reasonably old car... it only needed one pass and came up great.... recently had the front bar painted by Micolour and its perfect... the only place it needs a bit of TLC is the rear bar

Its never lived outside and came over from Japan when it was basically new... I think the cars that have spent the majority of their lives in Aus have better condition paint/bodies, as long as they are kept under cover etc

looks shmick

what did he use on the headlights?

any polish will do the drick. i had some autoglym super resin polish.. its just a fancy name for ordinary polish.. about 5 mins on each and they come up good as new.

i probably wouldn't use paint doctor on them i think that would be little too harsh..

car looks the goods mate my cars been in the shed for 2 months now some claying and so forth definately on the cards..

wheels are 10in, +20 offset... could even take some spacers too, gotta love GTR guards

the hella flush boys would not approve of my wheel/guard clearance but much more practical at this height... front lip on GTR is impossible not to damage if car is very low and it gets driven everyday

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...