Jump to content
SAU Community

Recommended Posts

Bill paid Zeb $5500.00 for this car a couple of years ago, when I was negotiating with Zeb at $4500.00.

When I spoke to Bill recently (about 6 months ago), he told me he wouldn't part with it without making a profit and he was a bit set back when I suggested he wont get what he paid for it, because he paid a grand too much for it.

Unfortunately, this example has been a bit butchered for supposedly better audio sound, as it has 6.5" speakers in the door pockets and needs some trim pieces that are now virtually impossible to be found, anywhere.

The stickers on the car were made by him (had someone print them) and aren't accurate and it has been sitting in his shed for about a year unregistered.

I will be bidding on this car, but not to $6500.00 by anymeans.

Cheers, D

Hi Dennis,

Good luck with the bidding. The car seems to be in very good condition. The speaker fitment seems OK, far better than the one in SA. It looks to have ACT registration now, I heard it was a 'Sunday car'.

Ahhh L20ET i want the engine.

The PNV owner in Adelaide has a spare engine. I think the car (and parts) are still for sale. 

post-61769-1276126367_thumb.jpg

JH

Edited by jrh001
For that sort of money, rebuild a L28, run Megasquirt, with a Turbo, still cheaper, than buying it for the engine..

Nigel

I am building an L28et for my car, but no Megasquirt and not cheaper than buying this car.

I have spent thousands for the parts to my engine and I'm only going to have 200 odd HP at the wheels, BUT it's the torque I want and I'm going to have something like 600nM which would nearly propel the 1250kg up telegraph poles.

D

Hi Dennis,

Good luck with the bidding. The car seems to be in very good condition. The speaker fitment seems OK, far better than the one in SA. It looks to have ACT registration now, I heard it was a 'Sunday car'.

JH

I have seen the car in the flesh, so to speak, both under Zebastian & Bill's ownerships. I took a sh!t load of pictures of it when Zeb brought it to the motel we stay at when in Canberra just before he sold it to Bill. I am very aware of it's appearance and the speaker install, I just would have preferred it to be a little more original.

Bill has another toy, it's an MR30 sedan with RB20 or 25 up front and he is happy to keep this only.

I guess he is trying to sell it, because it doesn't get used anymore. It is carrying ACT plates, but it has no registration to go with it. As I said before, it's been in a shed/garage for the last year doing nothing and if it was a Sunday car, it was annual or Bi annual.

Maybe if I own this as well, there might be 2 PNV's going to Adelaide for Skynats???

Cheers, D

I have seen the car in the flesh, so to speak, both under Zebastian & Bill's ownerships. I took a sh!t load of pictures of it when Zeb brought it to the motel we stay at when in Canberra just before he sold it to Bill. I am very aware of it's appearance and the speaker install, I just would have preferred it to be a little more original.

Bill has another toy, it's an MR30 sedan with RB20 or 25 up front and he is happy to keep this only.

I guess he is trying to sell it, because it doesn't get used anymore. It is carrying ACT plates, but it has no registration to go with it. As I said before, it's been in a shed/garage for the last year doing nothing and if it was a Sunday car, it was annual or Bi annual.

Maybe if I own this as well, there might be 2 PNV's going to Adelaide for Skynats???

Cheers, D

Aha my old car. Seems to be have deteriorated a bit since I owned it. Then again I sold it in 2003...wow 7 years on, how time flies.

I am building an L28et for my car, but no Megasquirt and not cheaper than buying this car.

What ECU are you going to use, one out of a 280zx?

Edited by Socrates
What ECU are you going to use, one out of a 280zx?

I have an ADAPTRONICS for the new engine, but will run it initially on an L28ET ECU I got from USA.

The purple DR has an adaptronics running that and I find it supurb and sh!tloads cheaper than anything else around other than Megasquirt. What I found ith the megasquirt was lack of support in Oz, so I went with this new boy on the block in Ozland. It's designed and built by an ex employee of Autronics and as I said, it's a great ECU.

Cheers, D

Aha my old car. Seems to be have deteriorated a bit since I owned it. Then again I sold it in 2003...wow 7 years on, how time flies.

I have owned mine since 2002 as it says on the rego label and if I get my way your old car might be headed back to Sydney.

Cheers, D

I cut a deal with the owner of this vehicle this morning.

I was in Canberra with a 2.5 hour lay over between jobs and got a CUA counter cheque drawn for the amount and Andrew (Mag86) offered to take me to the owners place. After some stuffing around and Andrew not having a clue where he was going and no street directory or GPS in his car it was 1542 and to late, so I contacted the owner to make other arrangements. He suggested I post the cheque and I could pick it up on my next days off, BUT!

Andrew offered to take the cheque to the owner for me tonight and do the paperwork for me to pick it up next week, BUT!

After some discussion between Andrew and the owner, there is no deal and the car is NO LONGER for sale to anybody other than Andrew, when he gets the money, no matter how long it takes.

Form your own opinions, but I was not privvy to the conversation and this evening went from a deal set in stone to absolutely ZILCH.

Cheers, D

BUT! The eBay auction is still running. If someone clicks 'Buy It Now' the owner is obligated to sell it to them. Likewise if someone bids over the reserve.

Messy plot, Shakespeare's ghost must be writing this one.

JH

He's not obligated to sell anything!

I bought a Cressida recently for $1500.00 and the seller wouldn't part with it for less than 2000.00 and ebay did NOTHING about it.

And I spoke to him this morning and he was told I was going to part it out.

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...