rb26 in a 180? Need answers

[SKYL9]

Hey I think it might be time to sell the line and go for a better project and the 1st thing that comes to mind is a 180 with a rb26 for the main reason of it shouldn’t be that expensive..

Pick up an old 180 ca18 for around 7-8k?

A 32 gtr half cut should be around the 6k?

1st question is can I import a slightly modded 180?

Like I want a full cage, nice tight locked diff and maybe some after market suspension and a few gauges even?

2nd question is can I use a rb26 gearbox on a rwd car? Or do I need a box off a rb25? Or if any1 else has any ideas id love to hear them

3rd question is what other parts would I need?

fuel pump? Im sure theres heaps more

And last question is what sorta brake upgrade could I go for?

[MINES_DATSUN]

Hey,

you can get a 180CA18DET for cheap around australia ,

RB26DETT you can get one out of a 33GTR with the box etc etc.

im not to sure about the 25tgearbox you will need more information on that.

you will need to get the car engineerd for dropping the a rb26dett inside .

also you will need r33 gtr brakes and some goot suspension and good rubber. the car will loose lots of traction dont forget. maybe itll requite 255's or some wider rear gaurds.

its alli can think of.

[PranK]

oh man - such a sweeeeet project!!

i wanna drop a 26 into a ceffy.

[T0nyGTSt]

oh man - such a sweeeeet project!!  

 

i wanna drop a 26 into a ceffy.

Buy a Ceffy with a 26 pre-installed!

These sorts of conversions make me laugh.

It seems the legendary 26 ends up landing in everything... Supras, S13's, Z32's.

I think it needs to go into a Micra!

There's some guys here with 26's in r31/r32/r33's. I hope them chime in.

T.

[SKYL9]

i wouldnt mind a ceffy.. keep it looking stock and i wouldnt be hassled to hard by cops..

whats the deal with importing modded cars? can it still be done?

[SKYL9]

what are ceffy's going for these days anyways? around 10ish?

[HKSgtst]

the mounting points of the GTR and the 25T gearbox are slightly different, the clutch is different too.

with that said i am pretty sure you'd have to use the GTR gearbox. Cheers ! :uh-huh:

[turbo_fury]

Err... Its 4WD, dont think the driveline will fit ?

[snyper510]

Out of all the engines you could drop into a 180sx, the RB26 conversion would be the MOST expensive. Stick with the SR20 or even the underrated CA18 – the money you’d save could power up either of those engines quite nicely. I’d also say that the RB26DETT is significantly heavier than any nissan four, and that having one sitting in the engine bay of your 180sx would send the weight distribution down the toilet somewhat.

[Cecam]

I've seen some 180SX's with RB26DETT's in them, they're an easy conversion.... not sure they're worth the cost though. As for the Cefiro, get a SE4 model and keep the atessa 4wd, should be a nice sleeper.

[Guest RedLineGTR]

depends what u wanna use the car fro drift drag etc..also i guess you would need some kind of suspension setup or somekind of budget to incorporate it into.

[Maxx]

unless u want a 10sec Drag car, else it's meaningless to drop a rb26 into a 180, which fxxk the balance up. For the $$ u spend, u could get a sr20 180 with HKS/tomei 2.2kit and a

HKS GT-RS turbo and makes it a very good all round 11 sec car.

u can't import a modded car now, but a lot of importer are happy to strip the car to standard and put every back after compliance. u have to pay for labour of course.

u might need a gts-t gearbox if u drop the RB26 in as GTR gear box is 4wd.

at least set of gts-t/gtr brake or even some aftermaket brake.

prepare to run top of the range sport tyre everyday, even R compound tyre.

[SKYL9]

yeah the car would only be used as a daily driver, drift and drag..

and i got a price from a known performace workshop and they said a drive in and drive away rb26 conversion for around the $8k

i was thinking.. the closer to standard rb26 would last longer than a modded sr20

[HKSgtst]

you can't fit an RB25det g/box to an RB26dett ..

you can however lock the g/box so that it'll run 2wd.

[DoughBoy]

you can't fit an RB25det g/box to an RB26dett ..  

you can however lock the g/box so that it'll run 2wd.

Considering that all RB blocks have the same bellhousing bolts you can run an RB20 RWD gearbox behind an RB26 if you wanted to.

It would be easier to run the ECR33 or Z32 gearbox (VG30 boxes fit, but have a shorter length to the shifter and a couple of minor things).

A more labour intensive approach is to use an RB26 box and disconnect the 4wd mechanism. But then you have a very very heavy gearbox, and might find yourself running out of mates when you need to change it.

[SKYL9]

would just a normal rb26 box be ok left in rwd?

is it just the extra weight of the box thats the only down side?

[chaos]

this is a bloody heavy engine for drift work u would find it much harder to control the car cause of the weight in the front end pure momentum would send u off the track or close to it. but also like mines meantioned with the 26 in a rwd car u would find the wheels wont fully grip till like 3rd gear and still get heavy wheel spin in 2nd gear

[Roy]

this is a bloody heavy engine for drift work u would find it much harder to control the car cause of the weight in the front end pure momentum would send u off the track or close to it. but also like mines meantioned with the 26 in a rwd car u would find the wheels wont fully grip till like 3rd gear and still get heavy wheel spin in 2nd gear

Heavier engine up front can be fixed with susp tuning, and as for too much power for a rwd chassis, again its all in the susp setup.

Drift cars are set up so they dont get traction. I also think a 250rwkw RB26 is going to be easier to control then a 250rwkw SR20 simply due to the power delivery being a lot more linear.

[SKYL9]

but no traction is a fun thing

[SmItLeR]

dude - i was going to do this project and have all the info that needed for conversion - the thing that stopped me was that fact that i waited 4 months for a RB26 and when i bought there was a prob with so i said fk this - not waiting another 4 months rb26 so now i'm rb25.

your best to go with RB25DET box - unless ur fkn good and can change the internals of the RB26 box to complfor your car. ur going to have to modify the sump and tailshaft , use the R33 crossmember as the engine will sit lower. and what eva ya need to know post it and i'll see if i can answer it

cheers

BRAD