Jump to content
SAU Community

Recommended Posts

Hi rob and welcome to SAU. A few little details. Please ALWAYS use the search function (top right corner of the page) and see if your topic has been covered before. In almost all cases it has. Please DO NOT just make up new topics willy, nilly - we have enough trouble with important information topics being kicked off the front page in no time for the forums to be filled with redundant threads that have been answered before.

So, I suggest you go do a search and check the stickied 'workshop information' thread in the sticked thread section at the top of the SA forum.

i had my alarm installed by GT Autosound......they did an awesome work.....also had dealings with Auto Perfection and loved the service and quality of work from there too mate.....how far down south are you talking and if your willing to drive up a bit north as well :D

or save money....get a viper alarm and you wont regret it.....loads of functions and pretty cheap as well......then get it installed :P

Also one of the easiest alarms to get past if you know what youre doing :D

But in saying that, no alarm is good enough to stop someone from taking your car that knows what theyre doing anyways...

Edited by SkyHi_33
if someone is going to take my car then they are going to do whatever it takes to get it......regardless of what i do mate.....but a viper is a good enough investment for me

Also probably a good idea to not let people know what alarm you have ;P

I know its unlikely that any SAU member will be considering stealing a car but even car crims in lizbef have net access nowadays

-D

Troy you don't even need an alarm to be covered by insurance unless they absolutely made it clear that they wouldn't insure you without one.......if that was the case, they would tell you exactly what to install.

Having said that, best to always air on the side of caution and check with your insurance company as Troy stated....it's only a phone call.

I have no problem whatsoever with a dirty big blue VIPER symbol flashing on my dash window .... and it would seem the crooks do respect it, as I haven't had anyone touch my car (except for one small testing incident) and I park it everywhere. They also don't know it is the black wired version, I have 2 kill switches, and I have 4 of the loudest piezo screamers you have ever heard .... if their ears can take 30-90 seconds of those things going off in their ears while they hotwire the car, then they can have it.

well I've had Just Cars and Shannons and they both require alarms with proper immobilization points for agree coverage on my car

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

they must meet these regulations

AS/NZS 4601:1999 certified system include:

➜ Automatic immobilisation within 40 seconds

of ignition switch off;

➜ 2 independent points of immobilisation;

➜ Connections enclosed in security housing;

➜ All black security wiring;

➜ Flashing dashboard LED to indicate that the system

is armed; and

➜ Secure owner PIN override.

the alarm is only as good as the install, and the 100% use of it, even when it's in your garage

and there isn't any alarms that can't be cracked by a pro. if they want your car it's gone.

but it will prevent 95% of the other idiots from taking your car

multi layer security is best and common sense, don't leave your car in the hood..lol

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

Lol:

YOUR POSTCODE

With 5 or more thefts reported each week, postcode 5108 is one of the highest theft risk locations. We recommend that you read these simple precautions you can take to protect your vehicle from theft.

YOUR CAR

The NISSAN SKYLINE 1998 was not fitted with an immobiliser when it was manufactured and unless it has been fitted with an Australian Standards approved immobiliser since then it is at risk of theft.

New passenger cars sold in Australia are required to have an immobiliser but before 2001 many cars weren't fitted with them. As a result these cars are targets for opportunists to 'hotwire' using something as simple as a screwdriver.

Engine immobilisers provide the most effective barrier available between a thief and your car, as long as you keep your keys safe. Click here for more information.

I am with Just Cars Troy and all they wanted was any alarm with 2 point immobilisation. The original version of my alarm didn't come with black wiring and they didn't give a toss about it when I told them. I even gave them my alarm model number and they looked it up and said it was fine.

so what does an insurance company do when it comes to a pay out if the car is never recovered or burnt to the ground (unable to confirm proper alarm installation if any)........they payout regardless of policy

Well respected insurance companies - such as Shannons - specify a particular standard of alarm system (as per AS/NZS certification) and required documentation to prove installation by an accredited installer - I have both documents noted on my Shannons policy. As for insurance companies such as JC... if one doesn't have anything nice to say, best not to say anything at all.

When I crashed my S15 (my fault) JC were awesome in letting me choose repairer, varying the amount of work done (I added a fg bodykit in leiu of the standard bars they had allowed for). I really can't complain at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...