Jump to content
SAU Community

A defect for defect's sake

Jamezilla

By Jamezilla,
in Victoria

 Share

Recommended Posts

Jamezilla Grand Master

Jamezilla

Posted
Posted

I have joined the yellow sticker club :Oops:

Went through a booze bus in Williams Rd, Toorak - was asked to wait at the end of the queue by the blue XR6 TMU candy-car. I blew a big fat 0 on the breath-test BTW.

They did inspection (I was the only car to be stopped). Pods OK as they are caged and secure. Intercooler OK as it is standard. Blow-offs OK as they are standard. Ride-height, rim size, gauge mounting, exhaust noise... all OK.

EPA letter coming as I have an EBC. Thanks for that.

Better check my cat is working OK :rolleyes:

But oh. What's this...

My new tyres (Sumitomos - less than 5,00km old) have a weight compliance index of 93. The ADR compliance for a GTR says they need to be 94. That and my steering wheel doesn't have a padded centre.

I went to Bob Jane this morning (who recommended, supplied and fitted the tyres) who were very apologetic - and hadn't EVER had this come up before. A look on their catalogue showed all 265/35/18 tyres are rated at 93. Even $750 a corner P-Zeros.

While we were looking, the officer who booked me popped in to check and see if he was correct in his findings? Seems that the 93 rating is very high - why the car required 94 he wasn't sure. Too late for me though - got my defect sticker.

Seems that the only way to get 94 or greater rated tyres is to change sizes, which then compromises the factory-stated rolling diameter, which could lead to rubbing on the guards at full-lock - DEFECT, or not complying to the vehicle standard (upsetting speedo readout etc) - DEFECT. Glad to see these laws have been well and truly thought out.

So... Bob Jane have admitted fault and are going to replace my tyres as soon as they find something suitable. Either way - my car has to be off the road after Friday arvo (they only gave me 3-days to fix). So I'm a bit annoyed.

Something to be aware of I guess...

Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so. They also have NEVER had this come up before.

What a waste of time.

Out of interest - what weight rating do people have on their tyres? What does the sticker (drivers door-jamb) say is required. Am I just using an unlucky rim size?

Worth noting too - that I still recommend Bob Jane in Prahran. They've been very good about this. Even the cop was surprised - that's where they take their cars.

Link to comment
https://www.sau.com.au/forums/topic/32555-a-defect-for-defects-sake/
Share on other sites
  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

predator Grand Master

predator

Posted
Posted

Yeah, its about time a few of these common things are thrown out, because most of the time they're not actually illegal - and therefore invalid defect which you *shouldn't* be paying.

When you get it all cleared Jamez, you should write a note to the police superintendant or something. Clearly you have *evidence* to suggest ADR items are being defected and that it neeeds to be passed down the chain of command that "padded steering wheel" and the good old "h pattern not displayed" are complete rubbish and NOBODY should be getting defected for these items.

Weight rating? ha, i barely know what it even is! and i don't think i *have* any stickers on my door jambs anymore, funny that..

Snowman Grand Master

Snowman

Posted
Posted

FYI James mine are 65 - but they are 265/45/18 not 35's. No idea of what the requirement is.

Sounds like you got someone that had just finished reading the complete rule book on legal requirements and wanted to impress someone with his knowledge!

whistla Proficient

whistla

Posted
Posted

i drove past that boose station going the opposite direction going home after a yarra blvd run....

i crapped my dacks as all the cops followed my car with their eyes, one of em radioing something into his mic

just hope he wasnt taking my details down for an EPA letter :) i was going "suspciously" slow and whats worse is it was uphill :rolleyes:

Jamezilla Grand Master

Jamezilla

Posted
  • Author
Posted

Cheers guys.

Snowman: Thanks for that. What brand are yours? Not sure if a 45 profile will be too tall though.

GTT-R: Mine are 650kg. Every other 265/35/18 is 650kg. So silly.

James: Was I there when you went past? Was about 9.00pm

I asked him about how to get the defect removed for the steering wheel - he said to show the Momo catalogue to VicRoads to show it never was padded, and I'll be fine. So why defect me on it in the first place? To prove what? Such a waste of time.

Worst thing is the sticker. So embarrasing having it on the car - especially for something I didn't really do. I bought new tyres - even had an alignment last week. I would have assumed they were OK...

Guest INASNT

Guest INASNT

Posted
Posted
  Quote
Worst thing is the sticker. So embarrasing having it on the car

With the rate the tmu cops hand out these things you usually see a few car with the yellow sticker around the street so everyone is used to seing them on imports and know its usually for bs anyway

Emre Proficient

Emre

Posted
Posted
  Quote
Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so.

They may be referring to the fact that yor car is supposed to have an airbag in the steering wheel.

  Quote
EPA letter coming as I have an EBC. Thanks for that.  

Better check my cat is working OK

Hopefully it will just for the noise and not for the emissions.

FYI, a full factory exhaust doesn't pass the EPA niose test.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...