Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm putting my car in the Warrnambol drags on Feb 8th, and was after a few tips from those who have dragged before (rpm launch?, etc)... Was also after a rough estimate on what time I should get, here's what I've got;

95 R33 GTST

FMIC

3" Full turbo-back exhaust (heat wrapped)

boost controller will be set to 15psi

loaning a set of 17" semi-slicks for the day

stnd suspension

k&n panel filter

Will also have new Apexi SAFC & bov by then too. Car will be dyno'd and tuned.

Link to comment
https://www.sau.com.au/forums/topic/32562-advice-on-dragging/
Share on other sites

after a few tips from those who have dragged before (rpm lunch?, etc)....

I suggest about 5000-5500rpm and slip it off the line with a little controlled wheelspin...

As for lunch, I recommend a light proscuitto, pecorino and rocket salad drizzled with truffle-infused extra-virgin olive oil with a nice glass of 1981 Penfolds Members Vintage Reserve Pinot Noir to cleanse the palatte.

95GTST,

The conditions (track surface/temp etc...) on the day/night will dictate what launch rpm works best. Your clutch will also be a big factor in how best to get your car off the line. Merli's suggested rpm & technique is a good way to go. Very harsh on a stock clutch though.

As for predicting how you go? I'd be happy with mid to low 13's (~105-107mph) with your current mods.

No no no Andrew you've got it all wrong. He actually wants to know how fast to eat his lunch (rpm lunch) kind of like a bites-per-minute sort of thing ;)

As for predicting how you go? I'd be happy with mid to low 13's (~105-107mph) with your current mods.
If he is using the standard turbo and with semi-slick tyres i'd be aiming for a 13.0-13.4sec pass (thats if the standard turbo doesn't blow up on 15psi).

:Bang:

Dont be scared to practice launches before you go out. A very quiet country road is good for 0-100 practice. The track will be different but if you have never done it before its good to get a feel on what rpm spins or bogs down. My car felt good on the street tarmak but at the drags i was getting massive tramp problems through worn lower control arm bushes and stuffed viscous lsd. When staged i hold the handbrake on dial revs and take up the clutch pedal slack, then engage it on the second last amber light releasing the handbrake at the same time(jap style).Hope you understand lol..

On regular sh1tty street tyres i launch off of the handbrake as described immediately above. On semi's, i've recently discovered that i get better 60' times (consistently 1/10th sec better), by doing a great big smokeshow first - then launching with a small amount of clutch-slip to control the wheel-spin through first gear.

Merli, who can afford the bling req'd to guzzle 1981 Penfolds Members Vintage Reserve Pinot Noir every day?!?!?

Oh and if you have a std computer, good luck laucnhing from 8000rpm. ;-)

Adrian

  • 4 weeks later...

hahaha i might be able to 8000rpm, but fat chance ill do that.

i leaunch mine at about 3500, but i hold it at 2500 at the staging lights till it starts to drop then as soon as it gets to the 3rd light down i give it half throttle and start slipping the clutch out pretty fast while moving my right foot fully to the floor, which pretty much makes it 3500 at time of clutch biting.

this allowed me to do a 13.550.

stock turbo, stock cooler, cat back exhaust, 11.3psi, 255 wide tyres.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...