Jump to content
SAU Community

Recommended Posts

Hey guys,

im just curious for those that have travelled to Japan/ Lived there - what is the general japanese opinion on the R33 GTS-t? it's common knowledge that S13/14/15 R32's are very popular for drift, but what do the Japanese think of the R33 Gts-t? do they get used commonly for drifting/dragging applications? or are they more the commodore commuter equavilent...

Link to comment
https://www.sau.com.au/forums/topic/325749-r33-gts-ts-in-japan/
Share on other sites

Damn good question. Ill send this Q on to some friends of mine in Japan n see if they can comment.

Id go for saying that they were like the Monaro in Aus. In most peoples eyes damn good, damn popular, commonish but still make people look, and of course there is always the bigger badder GTS that gets the bragging rights- just like the GTR-GTST

unable to get any extensive comment from peeps, only that it isnt used for drift due to its wheel-base n weight, especially when there were so many other cars out there that are better and cheaper for drifting purposes- eg. sr20det line-up

TBH a lot of them think they are an old car, hard to fit in a pay parking bay because they are a bit long compare to other square cars they've got atm. I actually saw more GTRs than GTS-T when I was there last trip. There aren't that many R33 on the road in Japan :P (compare to Australia)

TBH a lot of them think they are an old car, hard to fit in a pay parking bay because they are a bit long compare to other square cars they've got atm. I actually saw more GTRs than GTS-T when I was there last trip. There aren't that many R33 on the road in Japan :P (compare to Australia)

given that there are so many here there prob isnt as many in J land. Also GT-R's are the price of gts-t's almost in japan so why would you buy a gts-t

I was gonna say, for most people these days, R33s are irrelevant - they're old cars, too old to be of interest to the general public, but not old enough to be considered a classic.

Per capita, there are probably more Skylines in Australia than in Japan.

I would have thought at their peak they would have liked them, as for a while nearly every single R33 that appeared at the docks had an HKS pod and some sort of aftermarket exhaust on them.

Just like those AE101 Levins, it was hard to find one that didnt have the TRD or somethig similar bumper on them.

I would have thought at their peak they would have liked them, as for a while nearly every single R33 that appeared at the docks had an HKS pod and some sort of aftermarket exhaust on them.

Just like those AE101 Levins, it was hard to find one that didnt have the TRD or somethig similar bumper on them.

r33 hav a bulk body than the s12 etc thats 1 reason why they dont prefer r33s

I don't see many R33's owned by Japanese in Japan any more. But I will say that foreigners living in Japan seem to absolutely love them. I guess because they are slightly newer than the R32, reasonably priced, and easy to modify.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...