Jump to content
SAU Community

Recommended Posts

Hey guys,

im just curious for those that have travelled to Japan/ Lived there - what is the general japanese opinion on the R33 GTS-t? it's common knowledge that S13/14/15 R32's are very popular for drift, but what do the Japanese think of the R33 Gts-t? do they get used commonly for drifting/dragging applications? or are they more the commodore commuter equavilent...

Link to comment
https://www.sau.com.au/forums/topic/325749-r33-gts-ts-in-japan/
Share on other sites

Damn good question. Ill send this Q on to some friends of mine in Japan n see if they can comment.

Id go for saying that they were like the Monaro in Aus. In most peoples eyes damn good, damn popular, commonish but still make people look, and of course there is always the bigger badder GTS that gets the bragging rights- just like the GTR-GTST

unable to get any extensive comment from peeps, only that it isnt used for drift due to its wheel-base n weight, especially when there were so many other cars out there that are better and cheaper for drifting purposes- eg. sr20det line-up

TBH a lot of them think they are an old car, hard to fit in a pay parking bay because they are a bit long compare to other square cars they've got atm. I actually saw more GTRs than GTS-T when I was there last trip. There aren't that many R33 on the road in Japan :P (compare to Australia)

TBH a lot of them think they are an old car, hard to fit in a pay parking bay because they are a bit long compare to other square cars they've got atm. I actually saw more GTRs than GTS-T when I was there last trip. There aren't that many R33 on the road in Japan :P (compare to Australia)

given that there are so many here there prob isnt as many in J land. Also GT-R's are the price of gts-t's almost in japan so why would you buy a gts-t

I was gonna say, for most people these days, R33s are irrelevant - they're old cars, too old to be of interest to the general public, but not old enough to be considered a classic.

Per capita, there are probably more Skylines in Australia than in Japan.

I would have thought at their peak they would have liked them, as for a while nearly every single R33 that appeared at the docks had an HKS pod and some sort of aftermarket exhaust on them.

Just like those AE101 Levins, it was hard to find one that didnt have the TRD or somethig similar bumper on them.

I would have thought at their peak they would have liked them, as for a while nearly every single R33 that appeared at the docks had an HKS pod and some sort of aftermarket exhaust on them.

Just like those AE101 Levins, it was hard to find one that didnt have the TRD or somethig similar bumper on them.

r33 hav a bulk body than the s12 etc thats 1 reason why they dont prefer r33s

I don't see many R33's owned by Japanese in Japan any more. But I will say that foreigners living in Japan seem to absolutely love them. I guess because they are slightly newer than the R32, reasonably priced, and easy to modify.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...