Jump to content
SAU Community

Recommended Posts

Did the same conversion in mine but mines a r33 4 door but the rb26 was worked, forged pistons, acl bottom end bearings the works. I love it, i rekon its the best thing ive eva did to the car,i put a 34gtt gearbox in, lots of wheel spin and fun. :thumbsup:

For sure the rb26 is a great engine conversion for any Nissan I've seen them go in 260z's would have been nice if Nissan had made them 2.8 or 3l from the factory but they are still a great engine at 2.6

For sure the rb26 is a great engine conversion for any Nissan I've seen them go in 260z's would have been nice if Nissan had made them 2.8 or 3l from the factory but they are still a great engine at 2.6

HKS V-Cam!

:thumbsup:

Got the car up and runing last night fixed the few issues it had and test drove it. Test drove very good even at 8-9 psi moves nice. Will get it on the dyno and tune it up

Nice, post up dyno chart when done.

  • 2 weeks later...

Finally got the car onto the dyno only had enough time to get some prelim tuning done up to 10psi as the client wanted the car back so didnt get enough time to install the boost controller.

Here is a video of the car on the dyno, as i said earlier that we used the RB20 gearbox and as you can here in the video the 4th gear syncro is worn and has seen better days.

Enjoy some RB sounds on the dyno.

  • 3 weeks later...

The new E1280s from adaptronic is pretty sweet isnt it? even the old boxy version was pretty sweet for basic applications. The new one will probably replace the d-jetro PFC in our race car soon for a bit more R&D

Hey Trent

It's a nice bit of gear for the price far more advanced then a dejetro for a track car you have all the nice little features plus the ve tuning i started out with the e420c without ve then upgraded the firmware to ve and was much nicer.

Have you played with and mega squirts?? A mate of mine in qld swears by them the new ms3 has got some good features for a dirt cheap ecu the only downside you have to stick them together but a few place in the states put them together as a built unit.

Been playing around with your favourite ecu tonight pnp wolf v4 on a 33.

To be honest I Carnt go past nistune for any Nissan I really love to use them.

Ahh fair enough good excuse. Would like to get to the states one day check out the cars we are heaing to japan in October after Bathurst tho.

We are going to try do a full Vic season next yeah in the 31

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...