Jump to content
SAU Community

Recommended Posts

Hi guys,

just bought an 1999 R34 GTR a few weeks back.

The headlights look yellowish most probably because of burnt water/fog in the inside of the headlight.

I couldnt find any topics that was telling how to clean them.

I was thinking about putting the HL in the oven in order to melt the seal, then clean it and finnaly buy some black seal glue to put it back together but it might get a bit messy as i've got 2 left hands.

any other ideas?

cheers

Link to comment
https://www.sau.com.au/forums/topic/326373-headlights-yellowish-on-my-r34-gtr/
Share on other sites

i dont know where u are located but there is a place in melbourne called headlights +

they do all thet sort of stuff and it seems to last very well (better than the kits u can buy)

also if u do buy a kit be careful a mate of mine coroded the film off his lights because it was a very strong sort of polish/cleaner.

Depending on the headlights, some frost over due to the Australian climate and the extreme UV we experience, (others due to a poor seal.) these lenses are designed for the Japanese climate and UV rating. A good plastic polish will bring them back, brands such as mothers are a good bet and arnt too badly priced.....

I've tried many things previously on my headlights - anything from brasso, sandpaper, and PlasticX etc - all of them worked, but some had better finishes than others. All of them started going yellow again after 6-9 months though...

I just used glassylite on my headlights on Thursday night - easy system - brought them up crystal clear and got rid of the yellowing in my passenger-side R34 lense. The final UV coating you apply is supposed to help with Australian conditions and prevent the yellowing from occuring again. For the price I paid (maybe $35 incl. p&h from their website) I figured it was worth a go - especially given they claim it's got that UV sealant/protectant. Purely on their initial results of making them nice and non-yellow and clear - I would highly recommend it - it works.

Only time will tell whether it resolves the yellowing coming back every 6+ months :whoops:

  • 2 weeks later...

I used all of the above methods and can still see fine fracture marks and what looks like dried mosture on the INSIDE .. so nothing will fix them up from the outside. But they're not yellow at all ..just slightly faded in corners.

I used a series of fine grit sandpapers soaked in warm water, sanded the outside of the headlights, then soaked the headlights in a thick thich coat of plastic polish and they come up like brand new.

I've tried many things previously on my headlights - anything from brasso, sandpaper, and PlasticX etc - all of them worked, but some had better finishes than others. All of them started going yellow again after 6-9 months though...

I just used glassylite on my headlights on Thursday night - easy system - brought them up crystal clear and got rid of the yellowing in my passenger-side R34 lense. The final UV coating you apply is supposed to help with Australian conditions and prevent the yellowing from occuring again. For the price I paid (maybe $35 incl. p&h from their website) I figured it was worth a go - especially given they claim it's got that UV sealant/protectant. Purely on their initial results of making them nice and non-yellow and clear - I would highly recommend it - it works.

Only time will tell whether it resolves the yellowing coming back every 6+ months :D

Keep us updated on 'glassylite' because I've wondered (also being a chemist) what it is that causes the yellowing to return so soon?

In any case, if this has an effective UV sealant/protectant, I won't have to keep on rubbing my left hand headlight (on the Forester) like a genie bottle. My GT-R has no such dilemma. :D

Keep us updated on 'glassylite' because I've wondered (also being a chemist) what it is that causes the yellowing to return so soon?

In any case, if this has an effective UV sealant/protectant, I won't have to keep on rubbing my left hand headlight (on the Forester) like a genie bottle. My GT-R has no such dilemma. :D

No signs of yellowing yet - but it's still early days.

What I found interesting is I've never had yellowing issues on my drivers-side light, only the passenger side - perhaps one has been changed in Japan before I bought the car, or maybe one's had the coating scrubbed off at some point from over-zealous polishing - who knows.

I plan on keeping this thread updated, if I see yellowing return tho - never fear :D

I'll also be interested in hearing how this goes. I've been using Meguiar's PlastX - works well enough, though my driver's side headlight still has a very faint tinge to it. But at least I can actually see into them now, so bonus!

I'll also be interested in hearing how this goes. I've been using Meguiar's PlastX - works well enough, though my driver's side headlight still has a very faint tinge to it. But at least I can actually see into them now, so bonus!

Plastx can work very well. I have used it on a number of cars with generally very good results, especially when using it with a car polisher ( gently )

Once that yellow starts though it will need redoing periodically

Hi guys,

just bought an 1999 R34 GTR a few weeks back.

The headlights look yellowish most probably because of burnt water/fog in the inside of the headlight.

I couldnt find any topics that was telling how to clean them.

I was thinking about putting the HL in the oven in order to melt the seal, then clean it and finnaly buy some black seal glue to put it back together but it might get a bit messy as i've got 2 left hands.

any other ideas?

cheers

My headlights we're yellow too, I got some headlight cleaner stuff from SuperCheap Auto and it seemed to work pretty good, just follow the instructions and you'll have no probs :blink:

  • 3 weeks later...

I "think" the yellowing is cause by some sort on algae. Since the lense is quite porous and rain water isn't clean it leaves the ultimate place for algae to form.

- Polish the lense with any car polish.

- I found a little bit of RainX helps keep it clearer longer, maybe because it repels water better and "fills in" the mircoscopic pores on the lense.

But that's my own non-scientifically proven theory anyway - which seems to work :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...