Jump to content
SAU Community

Recommended Posts

If I was Subaru, I am not sure I would be advertising that the up and coming model (with several extra add-ons that will not be on the production car) achieved this time....

http://www.egmcartech.com/2010/06/09/video...urgring-in-755/

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Thats not too bad for a $55k car.

Subaru make great cars, just not the type that will lap the ring in a quick time. Im a proud owner of an Sti Liberty, does everything I ask of it in comfort and still gets around the corners ok. Not a patch on my GTR though, completely differrent cars.

^^^

I thought you drove a jetta?

Can they ring 1000 ponies out of the rexy yet, i doubt it.... :D

it's a car that cost about half of what the gtr did 20 years ago, or in perspective, the new gtr costs about the same as what the r32 did (once you take into account inflation, etc), so the sti wrx is about 1/3 the cost, has 2 less cylinders and 100cc smaller engine, and is designed to be something, that when modified, doesn't need to put out 1000hp, but only needs about 350 to 400hp with a buttload of traction and short gear ratios. different horses for different courses.

it's a car that cost about half of what the gtr did 20 years ago, or in perspective, the new gtr costs about the same as what the r32 did (once you take into account inflation, etc), so the sti wrx is about 1/3 the cost, has 2 less cylinders and 100cc smaller engine, and is designed to be something, that when modified, doesn't need to put out 1000hp, but only needs about 350 to 400hp with a buttload of traction and short gear ratios. different horses for different courses.

Very true, it might have 2 less cylinders (which means what? displacement is what we should be concerned about isn't it?), and a very similar sized engine. however, a 15 year old car does it at that speed, and even if that 15 year old car cost 3 times as much back in its prime, it does not now. Don't get me wrong, i appreciate the "idea" of the WRX's, they're nice little cars, but maybe they shouldn't be using a fast track like this to show their point, maybe they should use something that's a lot tighter where they actually can be faster than 15 year old car.

I have rallied Subarus, Own a shitbox Liberty wagon, and frankly, it outhandles my GTR, but this time is poo, R33 has (to be fair) 230ishkw, and I am guessing less than 400nm weighs 1500+kg, was on stock tyres.

STI has 221kw (aus spec) 404nm wieighs 1505kg (In full street luxo trim) and was on sticky tyres (Even stock tyres are sticker than stock on R33)

This was a Spec C, with work done to it...

I am a Subaru fan, and would still buy one again, but if I was Subaru I would not advertise this.

^^^

I thought you drove a jetta?

Can they ring 1000 ponies out of the rexy yet, i doubt it.... :blush:

No, the wife owns the Jetta. Does Bris to Syd via Putty Rd on a tank.

I own an Sti Liberty for my daily and an Aus R32 for a toy.

Anything lapping the ring sub 8sec is a reasonably quick car. My subie feels better in the corners that the GTR. The GTR has a shitload more power and is running semi's which make it really twitchy.

its a stocker man, no upgrades will be made. Does have Tein springs though over the factory billies. I think its been chipped early in the piece, goes hard for a stocker.

its a stocker man, no upgrades will be made. Does have Tein springs though over the factory billies. I think its been chipped early in the piece, goes hard for a stocker.

Tein Springs are nice, they give a good comfortable ride as well as having some tightness around the corners.

Well of course the Subie having from factoy Billistien's suspension will handle better :D

So your planning on just keeping the GTR as it is?

sif waste money modifying a near 20 year old japanese car... ;)
sif

wait..wut?

:P

Is that a Rolla I see Hamish?

Aww Yeah!

Tein Springs are nice, they give a good comfortable ride as well as having some tightness around the corners.

Well of course the Subie having from factoy Billistien's suspension will handle better ;)

So your planning on just keeping the GTR as it is?

:D

Is that a Rolla I see Hamish?

Aww Yeah!

Yeah, its a minter and fairly rare so it'll be staying as is. Does around 30km per month. GTR's are so cheap to run lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...