Jump to content
SAU Community

Recommended Posts

If I was Subaru, I am not sure I would be advertising that the up and coming model (with several extra add-ons that will not be on the production car) achieved this time....

http://www.egmcartech.com/2010/06/09/video...urgring-in-755/

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Thats not too bad for a $55k car.

Subaru make great cars, just not the type that will lap the ring in a quick time. Im a proud owner of an Sti Liberty, does everything I ask of it in comfort and still gets around the corners ok. Not a patch on my GTR though, completely differrent cars.

^^^

I thought you drove a jetta?

Can they ring 1000 ponies out of the rexy yet, i doubt it.... :D

it's a car that cost about half of what the gtr did 20 years ago, or in perspective, the new gtr costs about the same as what the r32 did (once you take into account inflation, etc), so the sti wrx is about 1/3 the cost, has 2 less cylinders and 100cc smaller engine, and is designed to be something, that when modified, doesn't need to put out 1000hp, but only needs about 350 to 400hp with a buttload of traction and short gear ratios. different horses for different courses.

it's a car that cost about half of what the gtr did 20 years ago, or in perspective, the new gtr costs about the same as what the r32 did (once you take into account inflation, etc), so the sti wrx is about 1/3 the cost, has 2 less cylinders and 100cc smaller engine, and is designed to be something, that when modified, doesn't need to put out 1000hp, but only needs about 350 to 400hp with a buttload of traction and short gear ratios. different horses for different courses.

Very true, it might have 2 less cylinders (which means what? displacement is what we should be concerned about isn't it?), and a very similar sized engine. however, a 15 year old car does it at that speed, and even if that 15 year old car cost 3 times as much back in its prime, it does not now. Don't get me wrong, i appreciate the "idea" of the WRX's, they're nice little cars, but maybe they shouldn't be using a fast track like this to show their point, maybe they should use something that's a lot tighter where they actually can be faster than 15 year old car.

I have rallied Subarus, Own a shitbox Liberty wagon, and frankly, it outhandles my GTR, but this time is poo, R33 has (to be fair) 230ishkw, and I am guessing less than 400nm weighs 1500+kg, was on stock tyres.

STI has 221kw (aus spec) 404nm wieighs 1505kg (In full street luxo trim) and was on sticky tyres (Even stock tyres are sticker than stock on R33)

This was a Spec C, with work done to it...

I am a Subaru fan, and would still buy one again, but if I was Subaru I would not advertise this.

^^^

I thought you drove a jetta?

Can they ring 1000 ponies out of the rexy yet, i doubt it.... :blush:

No, the wife owns the Jetta. Does Bris to Syd via Putty Rd on a tank.

I own an Sti Liberty for my daily and an Aus R32 for a toy.

Anything lapping the ring sub 8sec is a reasonably quick car. My subie feels better in the corners that the GTR. The GTR has a shitload more power and is running semi's which make it really twitchy.

its a stocker man, no upgrades will be made. Does have Tein springs though over the factory billies. I think its been chipped early in the piece, goes hard for a stocker.

its a stocker man, no upgrades will be made. Does have Tein springs though over the factory billies. I think its been chipped early in the piece, goes hard for a stocker.

Tein Springs are nice, they give a good comfortable ride as well as having some tightness around the corners.

Well of course the Subie having from factoy Billistien's suspension will handle better :D

So your planning on just keeping the GTR as it is?

sif waste money modifying a near 20 year old japanese car... ;)
sif

wait..wut?

:P

Is that a Rolla I see Hamish?

Aww Yeah!

Tein Springs are nice, they give a good comfortable ride as well as having some tightness around the corners.

Well of course the Subie having from factoy Billistien's suspension will handle better ;)

So your planning on just keeping the GTR as it is?

:D

Is that a Rolla I see Hamish?

Aww Yeah!

Yeah, its a minter and fairly rare so it'll be staying as is. Does around 30km per month. GTR's are so cheap to run lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...