Jump to content
SAU Community

R32 Gtr Block Crank Rods Compleate Head Ect

mr et
 Share

Recommended Posts

mr et Enthusiast

mr et

Posted
Posted

hey all i have some r32 gtr parts for sale car had 120 000kms

Rb26 block suit rebore (stock bore at the moment) $650

rb26 short nose crank suit polish or machine $300

rb26 stock rods good upgrade for rb25 $250

or $1000 complete bottom end

rb26 head complete (cams valves springs ) good condition just needs a clean maby a machine and valve stem seals was working well no problems $1250

more parts to come (-7 turbos a bunch of aftermarket cams stock recalibrated afms cleaned injectors ect)

located in brisbane will post if needed

sms me on 0402774241 or pm me will do better price for bulk buy

mr et Enthusiast

mr et

Posted
  • Author
Posted
ooo got poncams?

im still measuring them there all ground from nissan blanks but i think they all have a smaller base cyrcle ill let u know ( but no pons)

mr et Enthusiast

mr et

Posted
  • Author
Posted
what sort of weight is a 26 crank? (i'm in canberra) do you know if it'll fit in a 20? i am unsure of what "short nose" means,

thank you

sorry it's the part that drives the oil pump it's not the long drive it's the short I think it will fit the 20 I think that's how they make a rb24 and weight I'm nt sure farly heavy but should be able to post it

doo doo Proficient

doo doo

Posted
Posted
sorry it's the part that drives the oil pump it's not the long drive it's the short I think it will fit the 20 I think that's how they make a rb24 and weight I'm nt sure farly heavy but should be able to post it

I posted a crank through aussie post, it's about 21 kgs when wrapped- the very nice guy at the post office made an exception for me, don't see why it shouldn't be the same for anyone else.

mr et Enthusiast

mr et

Posted
  • Author
Posted
I posted a crank through aussie post, it's about 21 kgs when wrapped- the very nice guy at the post office made an exception for me, don't see why it shouldn't be the same for anyone else.

Yer very tru thanks mate for the info

mr et Enthusiast

mr et

Posted
  • Author
Posted

I am willing to let the whole lot go for 1600 head and all just no covers or sump or manafolds need it all gone asap guys or will swap foe a rb25 power cc and z32 Afm and a little cash so throw up some swap offers Of u want it and don't have cash

mr et Enthusiast

mr et

Posted
  • Author
Posted
sent you a text about afms but got no reply.. what are you asking for a pair of afms suit rb26?

Hey mate sorry I didn't get a SMS at all afm's I recently spent a fortune geting my afm's and everything re calabrated to perfection it was about 400 for the afm's make me a offer send me a pm or SMS on 0402774241

  • 2 weeks later...
  • 1 month later...
mr et Enthusiast

mr et

Posted
  • Author
Posted
hey all i have some r32 gtr parts for sale car had 120 000kms

Rb26 block suit rebore (stock bore at the moment) $400 price drop

rb26 short nose crank suit polish or machine sold

rb26 stock rods good upgrade for rb25 $250

rb26 head complete (cams valves springs ) good condition just needs a clean maby a machine and valve stem seals was working well no problems $1000 Price drop

more parts to come (-7 turbos a bunch of aftermarket cams stock recalibrated afms cleaned injectors ect)

located in brisbane will post if needed

sms me on 0402774241 or pm me will do better price for bulk buy

all needs to go soon can email me on [email protected]

  • 2 weeks later...
  • 2 weeks later...
mr et Enthusiast

mr et

Posted
  • Author
Posted
Just wondering if you still have the RB26 head for sale? If so, what condition is it in, and does it come with the inlet manifold/throttle bodies etc?

i still have the head for sale it is in great condition just requires the usual clean up it came of a perfectly good running engine

it dosnt come with the intake ore exhaust manafold if u are interested throw me a offer thanks for your interest

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...