Jump to content
SAU Community

Recommended Posts

need to pick someone's brain

car is r33 gtst

52mm isc alloy radiator

link ecu

basically the car runs so cold on my stock gauge im not sure its even up 2 running temp? and might explain my horrible fuel economy?perhaps in cold start alot?

i know its winter and all.. but during the day time it will get about 3mm above the cold on gauge 22 degree day... and at night it barely moves off the cold gauge lol 8 degrees last nite..

what could i do 2 try and bring it up more?

thanx

Link to comment
https://www.sau.com.au/forums/topic/327400-r33-operating-temp/
Share on other sites

you cant really judge the temp from the stock gauge

i've got an ecutalk display and it reads the stock sensors

my gauge will start moving off the bottom at about 60° and the middle is about 80° but 80° to 90° it doesn't really move

if you want to know what temp its running you could get an aftermarket gauge and put the sender in the return pipe of the radiator (supercheap sell adaptors that you cut the radiator hose in half and put in the middle)

or go to jaycar and get an lcd temp display kit (prob have to assemble it yourself but its easy) and leave it in your car permanently

Put the stock radiator back!

But seriously take your thermostat out and test it in a jug adding hot water till it opens - or since you have gone to the trouble of pulling it out just put a new one in anyway. You should get a rough idea of how hot your motor is by the output of the heater. If there is nothing wrong with your thermostat try blanking off two thirds of your radiator for the winter.

replace the thermostat, it shouldnt matter what temp it is outside its job is to keep the motor around 80c and will only flow enough coolant out to keep it there. once they get old they can get stuck open and it takes ages to get the car up to temp wasting fuel and not allowing it to run at the correct temp it was designed for if you have a good radiator fitted.

you cant really judge the temp from the stock gauge

i've got an ecutalk display and it reads the stock sensors

my gauge will start moving off the bottom at about 60° and the middle is about 80° but 80° to 90° it doesn't really move

if you want to know what temp its running you could get an aftermarket gauge and put the sender in the return hose of the radiator (supercheap sell adaptors that you cut the radiator hose in half and put in the middle)

or go to jaycar and get an lcd temp display kit (prob have to assemble it yourself but its easy) and leave it in your car permanently

NO. put it in the top hose . from the thermo stat to the top radiator tank

it should run about 82 degrees . and idealy should be about half way up the gauge . does your heater go hot or only half arse . when its got as warm as you think its goin to get gout andt feel the top hose . it should be too hot to keep your hand on .

the gauge and the ecy have their own temperature senders .

there is talk about some ecus having different temperature sensors installed for the ecu to read . check if your two look stock

or just buy a new thermo stat . leave the alloy radiator in it . thremo stat most likely isnt doin its job

before going into solution mode, check the actual water temp with a digital thermometer

it might be perfectly ok and you are changing things quicker than underwear to possibly fix something that isnt broken

sorry, i meant return to the rad

i also meant to add that i thought the thermostat was at fault here

whip it out and boil the kettle, then pour the boiling water on the thermostat, it should open up

if not, get a new one - and don't get a low temp one, you just don't need it

Yep don't go off the stock gauge, there is no way to tell.

FYI i run between 69 & 73 degrees with a Race Radiators item on a typical day. You might need to just alter the cold start mapping and so on

69 to 73?? That sounds quite cold, thought the ideal operating temperature is around 80degrees?

Long as cold start is adjusted and so on, I don't have any economy issues to speak of :whistling:

I get 400-450km to a tank (55l) around town or around 550km cruising @ 100

So it's clearly not a problem, and makes the same power as everyone else!

69 to 73?? That sounds quite cold, thought the ideal operating temperature is around 80degrees?

its a 31 thing, myne does the same. will not budge from 69 at night time. got up to a boiling 82 out on the track :whistling:

Maybe, i also have a thick intercooler & a small A/C condenser all infront of the rad as well, and the front bar really doesnt let much air in given the intake is less than half the size of the rad.

It'd be interesting to have someone look properly into it and workout why :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
×
×
  • Create New...