Jump to content
SAU Community

Just Bought An R35 Gtr

g35me

By g35me,
in R35 GTR

 Share

Recommended Posts

g35me Mentor

g35me

Posted
Posted

I bit the bullet today and put down my deposit on an R35. I am hoping to pick it up by the end of the week. I bought it second hand as they are starting to hit a more realistic value. The first mod will be a matte black vinyl wrap (The car is black). Is anyone in contact with the guy in Victoria that has the matte black vynil wrap done already, he was at the Nissan track day at Philip Island?

Link to comment
https://www.sau.com.au/forums/topic/327451-just-bought-an-r35-gtr/
Share on other sites
rotarytt Contributor

rotarytt

Posted
Posted (edited)

no but when you find it can you please tell us who is doing it. i have a car in the works that I don't want to have too paint.

nice car murdered out will look evil.

black rims and tinted lights.

the only decent wraps I saw were chameleon. but their from the uk. asked the guy for colours and that was the last i heard of him.

need to get this widebody thing on the road as a daily.

Edited by rotarytt
paulR32gtr Mentor

paulR32gtr

Posted
Posted

Any decent auto signwriter should be able to do a wrap for you - we had one done for a targa car and they did a pretty good job. Matte black would be really easy as they don't need to print anything up.

Wasn't cheap though at around $5k, but they were only given the car for about 36 hours before it was on the boat to tas - I think they said normally it shouldnt be more than $2k.

g35me Mentor

g35me

Posted
  • Author
Posted
The mob from Melbourne is call Exotic Kustoms. Check out there website http://www.exotickustoms.com.au/ and you can see an R35 in the matt black wrap. (its the same one that was at philip Island).

Thanks for the link. Yes, they are the guys that did the one at Phillip Island. I gave them a call and they can do it for approx $4000inc GST. So here comes another murdered GTR :ninja:

bradley Enthusiast

bradley

Posted
Posted
I bit the bullet today and put down my deposit on an R35. I am hoping to pick it up by the end of the week. I bought it second hand as they are starting to hit a more realistic value. The first mod will be a matte black vinyl wrap (The car is black). Is anyone in contact with the guy in Victoria that has the matte black vynil wrap done already, he was at the Nissan track day at Philip Island?

where did you get your r35 from was it from a car yard or a private seller

FrangaR33 Mentor

FrangaR33

Posted
Posted
I bit the bullet today and put down my deposit on an R35. I am hoping to pick it up by the end of the week. I bought it second hand as they are starting to hit a more realistic value. The first mod will be a matte black vinyl wrap (The car is black). Is anyone in contact with the guy in Victoria that has the matte black vynil wrap done already, he was at the Nissan track day at Philip Island?

Congratulations now whats your address and work hours? :)

On a more serious not congrats let us know how it goes and if in your opinion its all its cracked up to be. :D

  • 3 weeks later...
g35me Mentor

g35me

Posted
  • Author
Posted
Congratulations now whats your address and work hours? :)

On a more serious not congrats let us know how it goes and if in your opinion its all its cracked up to be. :D

Holly crap, what a car. I am amazed at the absolute mind warping acceleration of this car. You could drive it around town all day thinking you were in some luxo European car then flick that left switch to Race and flip the trans to manual and unleash the beast. Flicking those paddles with instant gear changes is a staggering experience. This car is worth every penny and in my opinion everything that it is cracked up to be.

I dont find the suspension hard at all it way less stiff in normal mode that my old 350Z and all these gearbox noises and clunking that you hear people talking about, well I must have a quiet one as I couldnt hear all that much. Just a few noises here and there but hell I can live with that in a heart beat.

I love it.

kinobal Rookie

kinobal

Posted
Posted
Holly crap, what a car. I am amazed at the absolute mind warping acceleration of this car. You could drive it around town all day thinking you were in some luxo European car then flick that left switch to Race and flip the trans to manual and unleash the beast. Flicking those paddles with instant gear changes is a staggering experience. This car is worth every penny and in my opinion everything that it is cracked up to be.

I dont find the suspension hard at all it way less stiff in normal mode that my old 350Z and all these gearbox noises and clunking that you hear people talking about, well I must have a quiet one as I couldnt hear all that much. Just a few noises here and there but hell I can live with that in a heart beat.

I love it.

Lucky Bugger! :bunny:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...