Jump to content
SAU Community

  

34 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

What are the fines for not having it, and how likely are you to get hit for it?

Mine is giving me the absolute shits. No matter how tight I wind down the butterfly nut, it still works it's way loose VERY quickly, and the constant noise of it rattling around in the boot while the wheel bounces is driving me insane. I'm very close to just ripping it out and ditching it.

To be honest, I very much doubt I'd use it if I copped a puncture. I'd stick with my car until assistance arrived anyway, as I really fking hate driving with that horrible POS anyway. Dangerous.

Thoughts?

Link to comment
https://www.sau.com.au/forums/topic/328734-removing-spare-wheelspace-saver/
Share on other sites

lol do you have to have a spare tyre in oz ?

in nz you dont have to have one .

if you have one and it fails a warrant ( tire shagged or its insecure) you just throw it out on the foot path and claim you dont have a spare . or done have one in your car when goin fo a warrant

Well in VIC the rule is I think if you do have one and the tyre is not roadworthy its defectable but if you done have one on you then its fine, so guess using the old excuse its geting a new tyre fitted onto it or something like that.

When i got defected here in Adelaide. My boot was all gutted and just had my Amp bolted to the spare tyre hole. They said you dont have to have one, so i just carried one of those silicon tyre sprays that you spray in your tyre to get it out of trouble.

I'm pretty sure some/all of the spray-in-a-can style tyre repair kits wreck the tyre somehow? I now the one that came with the 8' did, said on the label that once you spray it in, you need a new tyre when you get to a shop? Space-savers are a stupid idea. WTF are you supposed to do with a grotty full-size wheel when you change it?! (Under extenuating circumstances such as a full boot and passengers)

lol fair enough, I'll take your word for it :down:

If it wasn't in such good condition (even though it's a useless POS) I'd slash it to find out...I never thought to look for a valve, which would be an obvious giveaway. Only downside to me taking it out, is that my sub box will have nowhere to sit...might be a bit of dicking around...although it's not exactly the best setup anyway, since I've just bought some tie-downs and strapped the box to the strut brace rofl

exactly. And soon with performance mods coming up, I will have other defects to worry about anyway!

lol having said that though, police haven't looked twice at my car since I bought it. And it had 5% tint all round (since removed from front windows) and no front number plate! Only issues I ever had were from RTA inspectors in the carpark just after dropping of a friend at her yr12 formal, and that was only because of no front plate. Just told them the truth that the front bar had just been repaired, there were no holes for it yet. Didn't tell them I had no intention of ever drilling holes though :P they let me off no worries

Was only waiting until the plastic plates turned up so I could stick it to the lower lip of the bar anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...